GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » Block I/O » You are here: 1791-0A32
1791-0A32
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1791-0A32 1791-0A32//A1791-0A32//B
Common misspellings:
- l791-0A32
- 179l-0A32
- 1791-oA32
- 17910A32
Technical Specifications for 1791-0A32
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | Block I/O |
| Part number | 1791-0A32 |
| Product type | Output module |
| Number of outputs | 32 |
| Voltage type | AC |
| Mounting hardware | DIN rail |
| Mounting orientation | Vertical (recommended) or horizontal |
| Maximum air temperature | 140 degrees Fahrenheit |
| Mounting dimensions | 4.35 x 6.6 inches (PLC module version) |
About 1791-0A32
The 1791-0A32 module from Allen-Bradley is a Block I/O series module. It features 32 output points and it operates with AC power. The 1791-0A32 output module comes from the Series B product line of the Block I/O series. It is recommended to mount this Block I/O module vertically for the best operation results, but the module can be mounted horizontally too if necessary. In either position, the 1791-0A32 module needs to have enough airflow around it to prevent it from overheating. Its mounting dimensions are 4.35 x 6.6 inches (if it is the module version that is designed for PLC mounting) and it needs 2 inches of space for airflow around it on all 4 sides. The temperature of the air in the gap below the 1791-0A32 module must never exceed 140 degrees Fahrenheit.
The Allen-Bradley 1791-0A32 Block I/O module can also be mounted on a DIN rail and it comes with labels that the users can insert into the module’s front door panel and terminal strips in order to identify the module clearly and to designate it for its intended application. This module uses the Belden 9463 cable for its remote I/O link and it uses 14 AWG stranded wire with 3/64-inch insulation for all of its input and output wiring. The 1791-0A32 module is easy to ground by connecting its equipment grounding stud to the equipment ground with a nut that has a maximum torque rating of 15 pounds on an inch. Do not exceed this torque rating or the module may be damaged.
The Allen-Bradley 1791-0A32 module is a 32-point output module from the Block I/O series. It is protected by internal fusing and it runs on AC power.
F.A.Q for 1791-0A32
