GE / IP FANUC Series 90/30 In Stock
Allen Bradley | 592 Overload Relays
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Allen-Bradley designed the 592 overload relays to protect motors, motor controllers, and power wiring from overloads, phase losses, ground faults, stalls, and jams. The 592 overload relays come with DIP switches that allow the users to select several functions, including a manual reset function, an automatic reset function, a test function, the ground fault protection function, the stall and jam protection function, and the setting of the adjustable trip class. The 592 overload relays also have communication capabilities that can be used to control them or to obtain status information. These relays also have features that prevent communication losses. The non-volatile operating memory in the 592 overload relays is protected from losses. These relays come with manual reset buttons. The 592 overload relays must be connected to contactors when they are installed. Different 592 overload relays support different contactor sizes. The 592 overload relays support power supply input voltage ratings of 110/240 Volts AC at 50/60 Hertz of frequency and control circuit operating voltage ranges of 85 to 264 Volts AC at 47 to 63 Hertz of frequency. These relays consume 6 Watts of maximum power. Some 592 overload relays support hard contact trip relay outputs and some support triac outputs. The 592 overload relays can support single-phase or 3-phase motor current. Many 592 overload relays are eutectic alloy relays, and they require 3 heater elements when they operate. Some of these relays are open relays with no enclosure, while others are protected by general-purpose enclosures. The 592 overload relays without enclosures can operate at -20 to 55 degrees Celsius, and the relays with enclosures can operate at -20 to 40 degrees Celsius.
Read More >
| 592-EC2AC | Allen-Bradley’s 592-EC2AC relay is an E3 Plus overload relay from bulletin 592 with in-built ground fault detection as it is intended to protect single-phase or three-phase squirrel-cage induction motors against overload, phase loss, and ground faults. It contains four sourcing inputs and two normally open (NO) output units; it has a rated current range of 1 to 5 amps and a nominal operating voltage of 690 VAC. It is widely used in industrial applications such as motor control, HVAC, and process control. | Buy Now |
| 592-EEDC | The Allen-Bradley 592-EEDC relay is an overload relay from the Bulletin 592 series. It is a solid-state relay with a 120% FLA trip rating. The 592-EEDC relay supports ambient compensation and is sensitive to phase loss. The protection class rating of the 592-EEDC relay is IP20. This relay must be mounted inside a suitable cabinet to protect it from moisture. The 592-EEDC relay supports automatic or manual resetting. The weight of the overload relay is 0.52 kilograms. It complies with multiple standards including the UL508, NEMA ICS 2-1993 Part 4, EN 60947-4-1, CSA C22.2 No. 14, and EN 60947-5-1 standards. | Buy Now |
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.