GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 5069 Compact 5000 » You are here: 5069-RTB6-SCREW
5069-RTB6-SCREW
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
*Disclaimer: This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5069-RTB6-SCREW 5069-RTB6-SCREW//A
Common misspellings:
- 5o69-RTB6-SCREW
- 5069-RT86-SCREW
- 5069RTB6SCREW
Technical Specifications for 5069-RTB6-SCREW
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 5069 Compact 5000 |
| Part Number | 5069-RTB6-SCREW |
| Description | Removable Terminal Block |
| Terminal Type | Screw Terminals |
| Number of Pins | 6 Pins |
| Conductor Type | Stranded or Solid Copper Wire |
| Conductor Size | 22 to 16 AWG |
| Minimum Insulation Strip | 0.39 Inches |
| Screw Torque | 0.35 Pounds on an Inch |
| Power Wiring | SA Power |
| Compatible Modules and Controllers | CompactLogix 5380 Controllers, Compact GuardLogix 5380 Controllers, and the 5069-AEN2TR EtherNet/IP Adapter |
| Maximum Insulation Diameter | 0.14 Inches |
About 5069-RTB6-SCREW
The Allen-Bradley 5069-RTB6-SCREW Removable Terminal Block is a sensor/actuator (SA) power RTB from the Allen-Bradley Compact 5000 product line. The 5069-RTB6-SCREW Removable Terminal Block is used for wiring the GuardLogix 5380 controllers, the CompactLogix 5380 controllers, and the 5069-AEN2TR EtherNet/IP adapter module. The 5069-RTB6-SCREW Removable Terminal Block features screw terminals that can be used for simplified field-side wiring. It comes as part of an assembly kit (the 5069-RTB64-SCREW kit) consisting of 2 removable terminal blocks (the 6-pin 5069-RTB6-SCREW RTB and the 4-pin 5069-RTB4-SCREW RTB) and a pack of terminal screws. Generally, the 5069-RTB64-SCREW Removable Terminal Block kit is not included with the controllers or adapter module and it has to be ordered separately in the kit.
The 5069-RTB6-SCREW Removable Terminal Block, like every Compact 5000 RTB, does not support insertion and removal under power. It is necessary to disconnect the power source before the removal or installation of the RTB. The 5069-RTB6-SCREW Removable Terminal Block is attached to the adapter by hooking it directly to the adapter module and sliding it down against the adapter until it clicks into place. To wire the SA (field side) power source to the field-side of the 5069-RTB6-SCREW Removable Terminal Block safely, verify that the power is disconnected first. Strip off 0.39 inches (10 millimeters) of insulation from the wires, insert the power wires into the terminals, and turn the screw to close the terminal down in place on the wires. The supported conductors for wiring include solid or stranded copper wire with dimensions of 0.5 to 1.5 square millimeters (22 to 16 AWG). The 5069-RTB6-SCREW Removable Terminal Block has an open enclosure and an operating temperature range of 0 to 60 degrees Celsius.
The Allen-Bradley 5069-RTB6-SCREW Removable Terminal Block is a 6-pin wiring base for the modules from the Compact 5000 I/O system. This RTB is used with the CompactLogix 5380 controllers, the Compact GuardLogix 5380 controllers, and the 5069-AEN2TR EtherNet/IP adapter module.
F.A.Q for 5069-RTB6-SCREW
