GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 5069 Compact 5000 » You are here: 5069-RTB14CJC-SCREW
5069-RTB14CJC-SCREW
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
*Disclaimer: This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 5069-RTB14CJC-SCREW 5069-RTB14CJC-SCREW//A
Common misspellings:
- 5o69-RTB14CJC-SCREW
- 5069-RT814CJC-SCREW
- 5069-RTBl4CJC-SCREW
- 5069-RTB1ACJC-SCREW
- 5069RTB14CJCSCREW
Technical Specifications for 5069-RTB14CJC-SCREW
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 5069 Compact 5000 |
| Part number | 5069-RTB14CJC-SCREW |
| Type of supported module | Analog current/voltage/RTD/Thermocouple input module |
| Supported mode | Thermocouple |
| Wire size | 22 to 16 AWG |
| Wire type | Solid or stranded shielded copper wire |
| Wire temperature rating | 105 degrees Celsius (221 degrees Fahrenheit) |
| Maximum wire diameter | 2.9 millimeters (0.11 inch) |
| Wire connection | Single |
| Number of module channels | 4 |
| Module isolation voltage | 300 Volts (continuous) |
| Module temperature code | T4 |
About 5069-RTB14CJC-SCREW
The 5069-RTB14CJC-SCREW terminal block is a removable terminal block intended for use with the 5069 Compact 5000 series I/O modules. This Allen-Bradley/Rockwell Automation component is a small part that is used with analog current/voltage/RTD/thermocouple input modules. These kinds of input modules have 4 channels and they have the following ratings for voltage and current: +/- 10 Volts DC and 0 to 20 milliamps, respectively, and 0 to 4 kiloohms of resistance per channel. Additionally, it should be mentioned that the MOD power rating is 75 milliamps/18 to 32 Volts DC and the MOD power pass-through is 9.55 Amp/18 to 32 Volts DC. In addition to that, the SA power rating is 100 milliamps/18 to 32 Volts DC and SA power pass-through is 9.95 Amps/18 to 32 Volts DC.
The 5069-RTB14CJC-SCREW removable terminal block has a specified wire size of 0.5 to 1.5 square millimeters or 22 to 16 AWG. The wire should be made from industrial copper. The copper wire can be solid or stranded. Also, the wire is tested at 105 degrees Celsius (221 degrees Fahrenheit) and it has a maximum diameter of 3.5 millimeters or 0.14 inches. The 5069-RTB14CJC-SCREW removable terminal block supports only single wire connections and it has an insulation stripping length of 12 millimeters (0.47 inches) for the 5069-RTB18-SCREW connections. The torque specifications of the 5069-RTB14CJC-SCREW terminal block include 0.4 N-m or 3.5 pounds on an inch. The temperature code rating of the supported modules according to the North American, ATEX, and IECEx standards is T4.
The removable terminal block with the catalog number 5069-RTB14CJC-SCREW is used in combination with various module types from the 5069 Compact 5000 I/O series. The component is manufactured by Allen-Bradley/Rockwell Automation and it is available separately from the modules.
F.A.Q for 5069-RTB14CJC-SCREW
