GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1788 linking devices » You are here: 1788-enbt
1788-enbt
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The Allen-Bradley 1788-CNC Logix 5000 ControlNet Daughter Card is a communication card designed for linking the Allen-Bradley PowerFlex 700S family of drives and the FlexLogix family of programmable controllers with DriveLogix controllers and other communication-enabled devices that are linked to the bus (EtherNet Network). This module has a 5.0 Volts DC voltage requirement, 450 milliamps of maximum current draw at 5.0 Volts DC, and an open type of enclosure.
Other Available Revisions for the 1788-enbt 1788-enbt//A
Common misspellings:
- l788-enbt
- 17b8-enbt
- 178b-enbt
- 1788-en8t
- 1788enbt
Technical Specifications for 1788-enbt
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1788 linking devices |
| Part Number | 1788-ENBT |
| Description | EtherNet/IP Daugther Card |
| Operating Voltage | 5.0 Volts DC |
| Current Rating | 450 milliamps |
| Power Source | Class 2/SELV Power Source |
| Isolation Voltage | 500 Volts DC |
| Configuration | DIP Switches |
| Application | FlexLogix |
| Connector Type | V-pin connector |
| Average Weight | 0.1 Kilograms |
| Enclosure | Open Type |
About 1788-enbt
The Allen-Bradley 1788-CNC Logix 5000 ControlNet Daughter Card is a communication card designed for linking the Allen-Bradley PowerFlex 700S drives and the FlexLogix programmable controllers with DriveLogix controllers and with other communication-enabled devices that are linked to the bus (EtherNet Network). This communication module belongs to the Allen-Bradley Logix 5000 control system. This communication card also provides the FlexLogix processor with the ability to monitor and control I/O modules that are remotely connected to the controller via the ControlNet network. The 1788-CNC Daughter Card offers versatile functionalities that include support for I/O bridge operation, high-speed data transfer via data tags, simultaneous communication with other bus nodes, direct local access via the Network Access Port (NAP), coaxial media module support, and the use of the 200 Micron-rated communication cable.
The Allen-Bradley 1788-CNC Daughter Card has a maximum backplane current draw of 450 milliamps at 5.0 Volts DC and a total power dissipation rating of 2.3 Watts (7.68 BTU per hour). It comes in an open style enclosure, and it offers a wide operating temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). The 1788-CNC Daughter Card has a front-panel ControlNet connector that connects to a communication cable with a V-pin connector. When the 1788-CNC Daughter Card is used with the FlexLogix system, it provides the system with the ability to bridge messages from other networks such as the Ethernet, DeviceNet, and RS-232 serial networks. The 1788-CNC Daughter Card has multiple front-panel LED indicators that show both the module and network statuses. The 1788-CNC Daughter Card is designed for use within a 5 to 95% (non-condensing) relative humidity level. It weighs approximately 0.1 kilograms and is C-TICK, CSA, and CE certified.
The Allen-Bradley 1788-CNC Logix 5000 ControlNet Daughter Card is a communication card designed for linking the Allen-Bradley PowerFlex 700S family of drives and the FlexLogix family of programmable controllers with DriveLogix controllers and other communication-enabled devices that are linked to the bus (EtherNet Network). This module has a 5.0 Volts DC voltage requirement, 450 milliamps of maximum current draw at 5.0 Volts DC, and an open type of enclosure.
F.A.Q for 1788-enbt
