GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1788 linking devices » You are here: 1788-en2dn
1788-en2dn
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The Allen-Bradley 1788-EN2DN Ethernet-to-DeviceNet linking module is an Ethernet to DeviceNet bridge module designed to provide a seamless connection between the control-level networks and the device-level network. This module has a 12 to 30 Volts DC voltage requirement and a maximum current rating of 100 milliamps at 24 Volts DC.
Other Available Revisions for the 1788-en2dn 1788-en2dn//A
Common misspellings:
- l788-en2dn
- 17b8-en2dn
- 178b-en2dn
- 1788en2dn
Technical Specifications for 1788-en2dn
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1788 linking devices |
| Part Number | 1788-EN2DN |
| Description | Ethernet-to-DeviceNet linking Module |
| Operating Voltage | 12 to 30 Volts DC |
| Current Rating | 100 milliamps |
| Power Source | Class 2/PELV |
| Isolation Voltage | 50 Volts DC |
| Configuration | RSNetWorx |
| Application | EtherNet/IP-to-DeviceNet Link |
| Supported Baud Rates | 125K, 250K, and 500K baud |
| Average Weight | 0.1 Kilograms |
| Enclosure | Open Type |
About 1788-en2dn
The Allen-Bradley 1788-EN2DN Ethernet-to-DeviceNet Linking Module is an EtherNet to DeviceNet bridge module that can mount on a DIN rail and that is designed to provide a seamless connection between the control-level networks and the device-level network. Generally, the 1788-EN2DN Linking Module can be configured as a gateway to connect the control-level RSNetWorx network to the DeviceNet network for programming, diagnostics, configuration, data collection, or control applications. The 1788-EN2DN Linking Module can also be configured as a router/bridge device to connect the Ethernet/IP network to the DeviceNet network.
The Allen-Bradley 1788-EN2DN Linking Module also offers centralized I/O tables or data storage for shared data between the Ethernet/IP and DeviceNet networks because data placed on the I/O tables by one network can be read by another network interface. By using the 1788-EN2DN Linking Module, the operators can achieve support for peep-to-peer I/O messaging, and speedy and reliable configuration since the application parameters are easily downloadable, and they can achieve support for all the standard DeviceNet baud rates (125K, 250K, and 500K bauds). The 1788-EN2DN Linking Module has an operating voltage range of 12 to 30 Volts DC (24 Volts DC nominal) and a maximum current rating of 100 milliamps at 24 Volts DC.
The Allen-Bradley 1788-EN2DN Ethernet-to-DeviceNet linking module is an Ethernet to DeviceNet bridge module designed to provide a seamless connection between the control-level networks and the device-level network. This module has a 12 to 30 Volts DC voltage requirement and a maximum current rating of 100 milliamps at 24 Volts DC.
F.A.Q for 1788-en2dn
