GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1788 linking devices » You are here: 1788-dnbo
1788-dnbo
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The Allen-Bradley 1788-DNBO Logix 5000 DeviceNet Communication Card is a DeviceNet scanner module card from the Logix 5000 control system. This module has a 24.0 Volts DC voltage requirement, 260 milliamps of maximum current draw at 5.0 Volts DC, and an IP 00 rated enclosure.
Other Available Revisions for the 1788-dnbo 1788-dnbo//A
Common misspellings:
- l788-dnbo
- 17b8-dnbo
- 178b-dnbo
- 1788-dn8o
- 1788-dnb0
- 1788dnbo
Technical Specifications for 1788-dnbo
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1788 linking devices |
| Part Number | 1788-DNBO |
| Description | DeviceNet Communication Card |
| Operating Voltage | 24 Volt DC |
| Current Rating | 260 milliamps |
| Power Source | Class 2/SELV Power Source |
| Configuration | RSLogix 5000 V12 Configuration Software (Firmware Version 2.002 or later). |
| Application | FlexLogix |
| Supported Baud Rates | 125 Kilobaud, 250 Kilobaud, and 500 Kilobaud |
| Average Weight | 0.1 Kilograms |
| Enclosure | Open Type |
About 1788-dnbo
The Allen-Bradley 1788-DNBO Logix5000 DeviceNet Communication Card is a DeviceNet scanner module daughtercard from the Logix 5000 control system. This scanner module interfaces the FlexLogix control platform to the DeviceNet network for enhanced device-level control. This 1788-DNBO DeviceNet Daughtercard also provides the FlexLogix platform with high-speed, high-precision DeviceNet monitoring, configuration, and I/O scan capabilities. The 1788-DNBO Communication Card belongs to the Allen-Bradley Logix 5000 control family, and it can be installed on any DeviceNet host devices.
The 1788-DNBO Communication Card is connected to the FlexLogix backplane, and it draws 20 milliamps of maximum backplane current at 24.0 Volts DC and 260 milliamps at 5.0 Volts DC. It has a maximum power rating of 0.48 Watts at 24 Volts DC and a maximum power dissipation rating of 6.1 BTU per hour. The 1788-DNBO Communication Card has 3 network channels (0, 1, and 2) with 125 Kilobaud, 250 Kilobaud, and 500 Kilobaud baud rate,s respectively. These baud rates can be assigned manually via a hardware push-wheel on the board. The 1788-DNBO Communication Card has a 124 double integer (DINT) input area and a 123 DINTs output data area.
The Allen-Bradley 1788-DNBO Logix 5000 DeviceNet Communication Card is a DeviceNet scanner module card from the Logix 5000 control system. This module has a 24.0 Volts DC voltage requirement, 260 milliamps of maximum current draw at 5.0 Volts DC, and an IP 00 rated enclosure.
F.A.Q for 1788-dnbo
