GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1788 linking devices » You are here: 1788-cncr
1788-cncr
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The Allen-Bradley 1788-CNCR ControlNet Communication Card is a communication daughter card from the Allen-Bradley Logix 5000 family of control systems. This module has a 5.0 Volts DC voltage requirement, 475 milliamps of maximum current draw at 24 Volts DC, and an IP 00 enclosure.
Other Available Revisions for the 1788-cncr 1788-cncr//A
Common misspellings:
- l788-cncr
- 17b8-cncr
- 178b-cncr
- 1788cncr
Technical Specifications for 1788-cncr
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1788 linking devices |
| Part Number | 1788-CNCR |
| Description | ControlNet Communication Card |
| Operating Voltage | 5.0 Volts DC |
| Current Rating | 475 milliamps |
| Power Source | Class 2/SELV Power Source |
| Isolation Voltage | 500 Volts DC |
| Configuration | DIP Switches |
| Applications | FlexLogix Control System |
| Average Weight | 0.1 Kilograms |
| Enclosure | Open Type |
About 1788-cncr
The Allen-Bradley 1788-CNCR ControlNet Communication Card is a communication daughter card from the 1788 Logix 5000 family of control system components. This ControlNet communication card helps link the PowerFlex 700S AC drives and FlexLogix system with I/O modules and external devices that are connected on the ControlNet network. With the 1788-CNCR ControlNet Communication Card, these controllers can configure, control, and monitor I/O modules that are connected remotely from the processor via the ControlNet network. The 1788-CNCR Communication Card also provides the controllers with the capability to bridge process messages over multiple networks including the DeviceNet, EtherNet, or RS-232 Serial communication networks.
The Allen-Bradley 1788-CNCR ControlNet Communication Card offers a wide range of functionalities which include the ability to manage and control distributed I/O modules, transfer scheduled data via message tags, communicate with other ControlNet nodes, support local communication via Network Access Port, and to allow burst messaging for programming purposes, and it can be used as redundant media. The 1788-CNCR Communication Card is installed on the backplane, and it draws 475 milliamps of maximum current. It has a wide operating temperature range from 0 to 60 degrees Celsius and a maximum thermal dissipation rating of 8.1 BTU per hour. The 1788-CNCR Communication Card comes in an open-type enclosure and it can be used in a 5 to 95% non-condensing ambient relative humidity range. This module has front-panel diagnostic and status LEDs, and it also has a ControlNet connector that connects to a 200 Micron, V-pin connector cable.
The Allen-Bradley 1788-CNCR ControlNet Communication Card is a communication daughter card from the Allen-Bradley Logix 5000 family of control systems. This module has a 5.0 Volts DC voltage requirement, 475 milliamps of maximum current draw at 24 Volts DC, and an IP 00 enclosure.
F.A.Q for 1788-cncr
