GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1788 linking devices » You are here: 1788-CNFR
1788-CNFR
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1788-CNFR 1788-CNFR//A
Common misspellings:
- l788-CNFR
- 17b8-CNFR
- 178b-CNFR
- 1788CNFR
Technical Specifications for 1788-CNFR
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1788 linking devices |
| Part Number | 1788-CNFR |
| Description | ControlNet Daugther Card |
| Operating Voltage | 5.0 Volts DC |
| Current Rating | 450 milliamps |
| Power Source | Class 2/SELV Power Source |
| Isolation Voltage | 500 Volts DC |
| Configuration | DIP Switches |
| Application | FlexLogix//DriveLogix Control System |
| Average Weight | 0.1 Kilograms |
| Enclosure | Open Type |
About 1788-CNFR
The Allen-Bradley 1788-CNFR Logix 5000 ControlNet Module Card is a communication card that links the FlexLogix and DriveLogix controllers to devices that are connected to the ControlNet network. The 1788-CNFR ControlNet Communication Card also provides the FlexLogix and DriveLogix controllers with the access they need to monitor, control, and configure I/O modules that are remotely connected to the controller processor on the ControlNet network. Standard features for this module include the I/O bridge functionality that allows for managing multiple (distributed) I/O modules, and the network bridge capability which offers the ability to bridge communication to and from different networks including the Ethernet/IP network, DeviceNet network, and the RS-232 serial communication network. The 1788-CNFR Communication Card also supports the transfer of scheduled data via produced/consumed tags, unscheduled MSG commands with other nodes on the bus, simplified configuration and programming through downloading and uploading or application files using a PC, redundant and fiber media for enhanced optical isolation, and noise immunity.
The 1788-CNFR Communication Card requires a Class 2/SELV power source with 5.0 Volts DC supply voltage and 450 milliamps maximum backplane current at 5.0 Volts DC. The 1788-CNFR Communication Card has 2 node address switches for assigning node addresses between 01 and 99. It also has one rear module status LED and I/O status LED, which shows the module and I/O operation status. The 1788-CNFR Communication Card is designed for applications rated for temperatures of 0 to 60 degrees Celsius, and it weighs approximately 0.1 kilograms (0.2 pounds).
The Allen-Bradley 1788-CNFR Logix 5000 ControlNet Module is a communication card that links the FlexLogix and DriveLogix controllers to devices that are connected to the ControlNet network. This module has 5 Volts DC of voltage requirement, 450 milliamps of maximum current draw at 24 Volts DC, and an IP 00 rated enclosure.
F.A.Q for 1788-CNFR
