GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1606 Power Supplies » You are here: 1606-xlsbuffer24
1606-xlsbuffer24
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The Allen-Bradley 1606-XLSBUFFER24 buffer unit is part of the 1606 power supply series. It needs to be mounted in a vertical position with sufficient clearances so that its functioning is not affected by heat.
Other Available Revisions for the 1606-xlsbuffer24 1606-xlsbuffer24//A
Common misspellings:
- l606-xlsbuffer24
- 16o6-xlsbuffer24
- 1606-x1sbuffer24
- 1606-xls8uffer24
- 1606-xlsbuffer2A
- 1606xlsbuffer24
Technical Specifications for 1606-xlsbuffer24
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1606 Power Supplies |
| Part number | 1606-XLSBUFFER24 |
| Rated voltage | 24V DC |
| Voltage range | 24-28.8V DC |
| Output voltage | 22.5V |
| Output current | 0 to 20 A |
| Charging current | 600 mA |
| Charging time | 18 seconds |
| Input current | 80 mA |
| Power dissipation | 1.9 W |
| Temperature range | -25 to 70 degrees Celsius |
| Dimensions | 64 x 124 x 102 mm |
About 1606-xlsbuffer24
The 1606-XLSBUFFER24 buffer is a buffer unit that has been designed by Allen-Bradley/Rockwell Automation and included in the 1606 catalog of power supplies by Allen-Bradley. This buffer unit is intended to operate in a controlled environment where the conditions will ensure that it does not suffer damage from overheating. The Allen-Bradley 1606-XLSBUFFER24 buffer unit has a rated voltage of 24 Volts DC and a voltage range of 24 to 28.8 Volts DC. This unit also has an output voltage of 22.5 Volts and an output current of 0 to 20 Amps. This output voltage rating can be selectable by a jumper. Other specifications of the Allen-Bradley 1606-XLSBUFFER24 buffer unit include different hold-up times and a current range from 0 to 20 Amps. The charging time is 18 seconds typical and the input current rating is 80 milliamps typical.
There are some specific installation instructions that need to be followed so that the Allen-Bradley/Rockwell Automation 1606-XLSBUFFER24 buffer unit can operate properly. One of these is the mounting orientation because the power terminal needs to be located on top of the unit. The buffer unit needs to be air-cooled and it must not have any obstructed airflow around it. It is recommended to leave a clearance of 20 millimeters at the top of the unit and 20 millimeters at the bottom. If there are devices located on both sides of the unit, it is recommended to leave a clearance of 15 millimeters on either side. This unit can operate with a temperature range of -25 to 70 degrees Celsius and it has dimensions of 64 x 124 x 102 millimeters (W x H x D).
The Allen-Bradley 1606-XLSBUFFER24 buffer unit is part of the 1606 power supply series. It needs to be mounted in a vertical position with sufficient clearances so that its functioning is not affected by heat.
F.A.Q for 1606-xlsbuffer24
