GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1606 Power Supplies » You are here: 1606-xls480e-3c
1606-xls480e-3c
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The 1606-XLS480E-3C Power Supply belongs to Allen-Bradley Bulletin 1606 series, which is a high-performance series of power supply modules. It has an output voltage of 24 Volts, an output current of 20 Amps, a power rating of 480 Watts, and an input voltage of 380 to 480 Volts AC.
Other Available Revisions for the 1606-xls480e-3c 1606-xls480e-3c//A
Common misspellings:
- l606-xls480e-3c
- 16o6-xls480e-3c
- 1606-x1s480e-3c
- 1606-xlsA80e-3c
- 1606-xls4b0e-3c
- 1606-xls48oe-3c
- 1606xls480e3c
Technical Specifications for 1606-xls480e-3c
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1606 Power Supplies |
| Part Number | 1606-XLS480E-3C |
| Product Description | Power Supply |
| Output Volts/Watts | 24-28 Volts/480 Watts |
| Input Voltage | 380-480 Volts AC/600 Volts DC |
| Operational Voltage Range | 323-552 Volts AC/450-780 Volts DC |
| Rated Input Current | 0.9 Amps at 380 Volts AC |
| Output Voltage | 24-28 Volts |
| Rated Output Current | 20 Amps at 24 Volts, 17.5 Amps at 28 Volts |
| Dimensions | 65 x 124 x 127 millimeters |
| Weight | 870 grams |
About 1606-xls480e-3c
The 1606-XLS480E-3C Power Supply is a 1606 series high-performance power supply module that has been manufactured by Allen-Bradley/Rockwell Automation. It comes with a reduced size and enhanced performance for providing low-cost industrial power solutions. The 1606-XLS480E-3C Power Supply has finger-actuated spring clamp terminals for a secure and time-saving wiring process. It features the smallest per Watt profile that is available and significant reverse current capabilities to ensure reliability. This module can be easily installed on a DIN rail without the need for screws, drilling, or any tools or pre-made holes. The 1606-XLS480E-3C Power Supply has 50,000 run hours of estimated service life when it is operated at a full-rated load. Up to 150% of the rated power is available for up to 5 seconds as a power boost.
The 1606-XLS480E-3C Power Supply has 24 to 28 Volts of output voltage and 20 Amps of rated output current at 24 Volts. It provides industry-leading efficiency and extended service life. The output is electronically protected against overloads. It has an overload design which offers up to 180% continuous nominal current with no negative thermal effect. Its effectiveness increases when it is wired in a parallel setup. The operational voltage range of the 1606-XLS480E-3C Power Supply is 323 to 552 Volts AC or 450 to 780 Volts DC. The output terminals are the positive output, negative output, and the “DC OK” relay contact. The input terminals are reserved for 3-phase line inputs and a protective earth. The output voltage potentiometer can be used for tuning the output voltage. The default factory setting is 24.1 Volts. This module also has a green “DC OK” LED and a red “Overload” LED to indicate its operating status. This power supply provides high levels of performance for special applications.
The 1606-XLS480E-3C Power Supply belongs to Allen-Bradley Bulletin 1606 series, which is a high-performance series of power supply modules. It has an output voltage of 24 Volts, an output current of 20 Amps, a power rating of 480 Watts, and an input voltage of 380 to 480 Volts AC.
F.A.Q for 1606-xls480e-3c
