GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1606 Power Supplies » You are here: 1606-XLSDNET4
1606-XLSDNET4
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1606-XLSDNET4 1606-XLSDNET4//A
Common misspellings:
- l606-XLSDNET4
- 16o6-XLSDNET4
- 1606-X1SDNET4
- 1606-XLSDNETA
- 1606XLSDNET4
Technical Specifications for 1606-XLSDNET4
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1606 Power Supplies |
| Part number | 1606-XLSDNET4 |
| Product type | DeviceNet power supply |
| Output voltage | 24 Volts DC |
| Output current | 3.8 Amps |
| Output power | 91.2 Watts |
| Output capacitance | 500 microfarads |
| AC input | 100 to 240 Volts AC |
| DC input | 110 to 300 Volts DC |
| AC input current | 0.85 to 0.48 Amps |
| DC input current | 0.91 to 0.33 Amps |
| Power loss | 7.9 Watts |
About 1606-XLSDNET4
The Allen-Bradley 1606-XLSDNET4 power supply is a DeviceNet power supply which supports a wide range of AC and DC input voltages. The nominal and overload currents on the power supply are sized for the ratings of the DeviceNet cables. Other features of the 1606-XLSDNET4 power supply include a compact size, a low inrush surge, and a high level of efficiency. The output voltage of the power supply is fixed at 24 Volts DC. The output current rating is 3.8 Amps and the output power rating is 91.2 Watts at 24 Volts DC. The output capacitance of the power supply is 3500 microfarads. The input range for AC voltages is 100 to 240 Volts AC (single-phase) at 50 to 60 Hertz. The AC input current range is 0.85 to 0.48 Amps. The typical AC input inrush current is 9 Amps and the peak inrush current is 11 Amps.
The DC input voltage range for the 1606-XLSDNET4 power supply is 110 to 300 Volts DC. The DC input current range is 0.91 to 0.33 Amps. The typical efficiency of the power supply is 92% and the rated power loss is 7.9 Watts. The typical hold up time for the 1606-XLSDNET4 power supply at 100 Volts AC, 120 Volts AC, and 230 Volts AC is 44 milliseconds, 44 milliseconds, and 85 milliseconds, respectively. The wire sizes recommended for the input and output terminals are 20 to 12 AWG and 26 to 12 AWG, respectively. The recommended operating temperature range is from -25 to 70 degrees Celsius. The output of the power supply derates by 2 Watts for every degree Celsius of temperature increase between 60 and 70 degrees Celsius. The dimensions of the 1606-XLSDNET4 power supply are 40 x 124 x 117 millimeters.
The 1606-XLSDNET4 module is a 1606 series DeviceNet power supply designed for dual AC/DC input. The ouput voltage rating of the 1606-XLSDNET4 module is 24 Volts DC.
F.A.Q for 1606-XLSDNET4
