GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1606 Power Supplies » You are here: 1606-XLP95E
1606-XLP95E
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1606-XLP95E 1606-XLP95E //A
Common misspellings:
- l606-XLP95E
- 16o6-XLP95E
- 1606-X1P95E
- 1606XLP95E
Technical Specifications for 1606-XLP95E
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1606 Power Supplies |
| Part Number | 1606-XLP95EÂ |
| Output Voltage, | 24V |
| Output Current | 3.9 A |
| Output Power | 95 Watts |
| Ripple and Noise | 50 mV |
| Input Voltage | 100 to 120V AC/ 220 to 240V AC(auto-select) |
| Power Factor | 0.55 |
| Efficiency | 90% |
| Power Losses | 10,5 Watts |
| Connection Terminals | Spring |
| Weight | 360 Grams |
About 1606-XLP95E
The 1606-XLP95E power supply is a switched-mode power supply that has been designed by Allen-Bradley and included in its 1606 series. This power supply provides quick mounting and connecting options. The wiring is performed through a spring connector and the power supply can be mounted on a DIN rail easily. This power supply comes with a low inrush current limiting level and an active or passive PFC. The Allen-Bradley 1606-XLP95E switched-mode power supply comes with a selectable operating mode and it can operate with excellent efficiency and temperature ratings. The efficiency rating of this power supply goes up to 90 percent and it can operate in a temperature range of -10 to 70 degrees Celsius. The power supply will be derated by at least 2 Watts per additional degree Celsius if the temperature exceeds this range.
The Allen-Bradley 1606-XLP95E switched-mode power supply has a typical power factor of 0.55 and it is rated at about 10.5 Watts of power losses. This power supply has an unlimited lifetime and an MTBF rating of at least 500,000 hours. The Allen-Bradley 1606-XLP95E switched-mode power supply has an AC input voltage range of 100 to 120 Volts AC, or 220 to 240 Volts AC that can be auto-selected. It also comes with a DC input voltage rating of 290 Volts DC. This power supply has an approximate shipping weight of 360 grams, and the following dimensions: a width of 73 millimeters, a height of 75 millimeters, and a depth of 103 millimeters. This device comes with a specific input inrush limiter known as an NTC.
The Allen-Bradley 1606-XLP95E switched mode power supply comes with compact dimensions that enable it to be easily mounted and connected to different devices. It is manufactured in the Allen-Bradley 1606 power supplies series.
F.A.Q for 1606-XLP95E
