GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1606 Power Supplies » You are here: 1606-XLP90B
1606-XLP90B
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1606-XLP90B 1606-XLP90B//A
Common misspellings:
- l606-XLP90B
- 16o6-XLP90B
- 1606-X1P90B
- 1606-XLP9oB
- 1606-XLP908
- 1606XLP90B
Technical Specifications for 1606-XLP90B
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1606 Power Supplies |
| Part Number | 1606-XLP90B |
| Output Voltage | 24V |
| Output Current | 3.75 A |
| Output Power | 90 Watts |
| Ripple and Noise | 50 mV |
| AC Input Voltage | 380 to 480V AC |
| Power Factor | 0.60 |
| Efficiency | 89.5% |
| Power Losses | 10.5 Watts |
| Connection Terminals | Spring |
| Weight | 360 grams |
About 1606-XLP90B
The 1606-XLP90B power supply is a compact power supply from the 1606 series of switched-mode power supply devices that are made by Allen-Bradley. This power supply comes with different features that enhance operations and make it easy to install and setup. These installation features include an enhanced overload design that provides a high-efficiency performance and special measurements that enable the drive to be mounted and connected quickly. The Allen-Bradley 1606-XLP90B compact power supply operates with a low inrush current limiting and it employs a passive and active PFC depending on the operations. This power supply can be paired with different devices such as buffer and redundancy modules and this power supply can operate in both single and multi-phase modes.
The Allen-Bradley 1606-XLP90B compact power supply has a power adjustment range of 12 to 15 Watts and multiple output and input voltages. This power supply has a relay output and a “DC OK” status indicator. The Allen-Bradley 1606-XLP90B compact power supply has an output voltage of 12 Volts DC and an output current of 7.5 Amps. The power supply also has a ripple rating of 50 millivolts and an output power of 90 Watts. This power supply comes with an MTBF rating of 500,000 hours and an external input fuse that is rated for 10 Amps or 6 Amps rated. The power supply comes with an efficiency of 88.5% when operating in ideal conditions. The operating temperature range is from -25 to 70 degrees Celsius, and if the room temperature exceeds this range, the power supply will need to be derated by at least 2.5 Watts per degree Celsius.
The Allen-Bradley 1606-XLP90B compact power supply has a weight of 360 grams and it can be easily mounted on a DIN rail. It is a member of the 1606 power supplies product line.
F.A.Q for 1606-XLP90B
