GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1606 Power Supplies » You are here: 1606-XLP25A
1606-XLP25A
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1606-XLP25A 1606-XLP25A//A
Common misspellings:
- l606-XLP25A
- 16o6-XLP25A
- 1606-X1P25A
- 1606XLP25A
Technical Specifications for 1606-XLP25A
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1606 Power Supplies |
| Part Number | 1606-XLP25A |
| Description | Switched Mode Power Supply |
| Output Power | 25 Watts |
| AC Input Voltage | 00 to 240 Volts AC |
| Output Voltage | 5 to 5.5 Volts DC |
| Rated Input Current | 0.5 Amps |
| Output Current Rating | 5.0 Amps |
| Inrush Current Rating | 35 Amps |
| Hold-up Time | 19 milliseconds |
| Efficiency | 80% |
| Connection Terminals | Spring |
| Dimensions | 1.77 x 2.95 x 3.58 inches |
| Weight | 0.53 Pounds |
About 1606-XLP25A
The Allen-Bradley 1606-XLP25A Switched Mode Power Supply from the 1606 high-performance power supply series. The 1606-XLP25A Power Supply, like every 1606 series power supply, features auto-range input power, a selectable operation mode, enhanced temperature and efficiency ratings, simplified DIN rail mounting, and connection via caged spring terminals. The 1606-XLP25A Power Supply has a mean time before failure (MBTF) value of 600,000 hours at the nominal input and 40 degrees Celsius and it has a total output power of 25 Watts. It also has an operational efficiency of 80% and a 0.44 power factor value. The 1606-XLP25A Power Supply offers fused input for short-circuit protection, and it also has a MOVs-lined circuit for protection against voltage transients. The 1606-XLP25A Switched Mode Power Supply features auto-select voltage input, which offers the operators a wide operating range. It has an acceptable operating voltage range of 85 to 264 Volts AC and 85 to 370 Volts DC.
The Allen-Bradley 1606-XLP25A Switched Mode Power Supply has a maximum input current rating of 5.0 Amps at 5.1 Volts DC and 35 Amps of rated inrush current. The 1606-XLP25A Switched Mode Power Supply has a nominal output voltage rating of 5.0 Volts DC, which is adjustable to up to 5.5 Volts DC. It also has an output current rating of 5.0 Amps at 5.1 Volts DC and an output current rating of 4.5 Amps at 5.5 Volts DC. This power supply has a typical hold-up time of 19.0 milliseconds at 240 Volts AC minimum rating (and 170 milliseconds at the maximum input rating) and it has a maximum power loss rating of 6.3 Watts. The 1606-XLP25A Switched Mode Power Supply offers several built-in protection features including short-circuit protection, open-circuit protection, and overload protection for up to 1.9 times the rated module input level.
The Allen-Bradley 1606-XLP25A Switched Mode Power Supply is a DIN rail-mounted compact power supply from the 1606 series of high-performance industrial power supplies. This module is rated at15 Watts, with a 5.0 to 5.5 Volts DC adjustable output voltage range, and an output current rating of 5.0 Amps.
F.A.Q for 1606-XLP25A
