GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1606 Power Supplies » You are here: 1606-XLP15A
1606-XLP15A
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1606-XLP15A 1606-XLP15A//A
Common misspellings:
- l606-XLP15A
- 16o6-XLP15A
- 1606-X1P15A
- 1606-XLPl5A
- 1606XLP15A
Technical Specifications for 1606-XLP15A
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1606 Power Supplies |
| Part Number | 1606-XLP15A |
| Description | Switched Mode Power Supply |
| Output Power | 15 Watts |
| AC Input Voltage | 100 to 240 Volts AC |
| Output Voltage | 5.5 to 5.5 Volts DC |
| Rated Input Current | 0.28 Amps |
| Output Current Rating | 3.0 Amps |
| Inrush Current Rating | 31 Amps |
| Hold-up Time | 45 Milliseconds |
| Efficiency | 77.2% |
| Connection Terminals | Screw |
| Dimensions | 0.86 x 2.95 x 3.58 inches |
| Weight | 0.29 Pounds |
About 1606-XLP15A
The Allen-Bradley 1606-XLP15A Compact Switched Mode Power Supply from the bulletin 1606 Power Supply series. This power supply features a standard plastic cover, screw cage terminals, and jumper-selectable operation mode (the available modes are the single or parallel mode). The 1606-XLP15A Compact Switched Mode Power Supply has a mean time before failure (MTBF) rating of over 500,000 hours and a total output power of 15 Watts. It has a standard efficiency rating of 77% and a power factor of 0.44. The 1606-XLP15A Compact Switched Mode Power Supply is internally fused for protection against short-circuit faults, and its circuit is lined with MOVs for protection against transients of up to 750 Volts. It features auto-ranging input power with 100 to 240 Volts AC and 110 to 300 Volts DC operating ranges. It has a rated input current of 0.28 Amps at 100 Volts AC and 0.17 Amps at 196 Volts AC, and an inrush rating of 31 Amps at 196 Volts AC.
The 1606-XLP15A Compact Switched Mode Power Supply has a typical hold-time of 45 milliseconds at 100 Volts AC and 168 milliseconds at 230 Volts AC, and it has a maximum power loss rating of 4.5 Watts at 40 degrees Celsius. It has an adjustable output voltage range between 5.0 Volts DC and 5.5 Volts DC (at 5.0 Volts DC nominal) and a nominal output current rating of 3.0 Amps. The 1606-XLP15A Compact Switched Mode Power Supply is designed with built-in protective and diagnostic features that provide open-circuit detection, short-circuit protection, and overload protection at up to 1.9 times the device’s rated input, and output noise suppression. The 1606-XLP15A Compact Switched Mode Power Supply has an operating temperature range of -10 to 70 degree Celsius and a standard de-rating value of 0.4 Watts per degrees Celsius.
The Allen-Bradley 1606-XLP15A Switched Mode Power Supply is a DIN rail-mounted compact power supply from the bulletin 1606 family of high-performance industrial power supply. This module is rated at 15 Watts, with a 5.0 to 5.5 Volts DC adjustable output voltage range, and an output current rating of 3.0 Amps.
F.A.Q for 1606-XLP15A
