GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1606 Power Supplies » You are here: 1606-XLEDNET3
1606-XLEDNET3
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1606-XLEDNET3 1606-XLEDNET3//A
Common misspellings:
- l606-XLEDNET3
- 16o6-XLEDNET3
- 1606-X1EDNET3
- 1606XLEDNET3
Technical Specifications for 1606-XLEDNET3
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1606 Power Supplies |
| Part number | 1606-XLEDNET3 |
| Description | Power supply unit |
| Communication | DeviceNet |
| Voltage | 120/240 Volts AC |
| Power | 80 watts |
| Product line | XLE |
| Mounting | DIN rail |
| Temperature | -25-70 degrees Celsius |
| LED | Present |
About 1606-XLEDNET3
The 1606-XLEDNET3 module is an Allen-Bradley power supply with an input voltage rating of 120/240 Volts AC. It comes with a Device Net adapter. The output voltage rating is 24 to 28 Volts DC with a power rating of 80 Watts. This 1606-XLE series power supply comes with an improved design and it has minimal heat output. The compact size of the unit saves floor space. It is designed with different termination options including push in, spring clamp, and plug terminations. It has built-in redundancy features. The 1606-XLEDNET3 module comes with a conformal coating that helps it to withstand extreme weather and environmental conditions. It comes with a high MTBF and is reliable. It features low inrush current limiting. It comes with special buffer modules and redundancy modules. The SMPS unit can be mounted with a DIN rail. This variant is 89.8% efficient. The dimensions in millimeters are 4.88 x 1.26 x 4.02 millimeters.
The Allen-Bradley 1606-XLEDNET3 power supply module has both input and output terminals that are located on the front side. An LED indicator that is known as the “DC OK” LED indicator is present along with the operation mode selector on the module. The DeviceNet network adapter in the power supply is used to connect with other devices on the local network. The module has an open enclosure. During the installation process, the 1606-XLEDNET3 power supply module should be properly disconnected from the mains power and it should be earthed. Because it has an open enclosure, it should be handled carefully and liquids and splashes from all directions should be avoided. The 1606-XLEDNET3 power supply module should be operated in a temperature range of -25 and 70 degrees Celsius.
The 1606-XLEDNET3 module is an Allen-Bradley power supply. It has a voltage rating of 120/240 Volts AC.
F.A.Q for 1606-XLEDNET3
