GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1606 Power Supplies » You are here: 1606-XLBUFFER
1606-XLBUFFER
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1606-XLBUFFER 1606-XLBUFFER//A
Common misspellings:
- l606-XLBUFFER
- 16o6-XLBUFFER
- 1606-X1BUFFER
- 1606-XL8UFFER
- 1606XLBUFFER
Technical Specifications for 1606-XLBUFFER
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1606 Power Supplies |
| Part Number | 1606-XLBUFFER |
| Product Type | Buffer Module Power Supply |
| Product Line | 1606 Switched Mode Power Supplies |
| Bulletin | 1606-XL |
| Voltage Rating | 24 to 28.8V DC |
| Output Voltage | 23 to 27.8V DC |
| Output Current | 0 to 20 A |
| Frequency | 47 to 63 Hz |
| Output Power | 480 W |
| Input Current | 600 mA |
| Mounting | DIN rail |
| Wire Size | 20 to 10 AWG |
| Operating Temperature | -10 to 70 degrees Celsius |
| Dimensions | 102 x 64 x 124 mm |
About 1606-XLBUFFER
The 1606-XLBUFFER Power Supply is a buffer module power supply manufactured by Allen-Bradley as a member of the 1606 Switched Mode Power Supplies series and the Bulletin 1606-XL product line. It runs on an input voltage ranging from 24 to 28.8 Volts DC, an output voltage of 23 to 27.8 Volts DC, and an output current of 0 to 20 Amps. This module comes with a frequency ranging from 47 to 63 Hertz, with an output power of 480 Watts and an input current of at least 600 milliamps. This module has a variety of specifications that enable it to provide optimal performance. It supports DIN rail mounting and the use of stranded and solid cable with a gauge of 20 to 10 AWG. The module operates in a temperature range from -10 to 70 degrees Celsius, and it is stored in a temperature range between -25 and 85 degrees Celsius. This module has approximate measurements of 102 x 64 x 124 millimeters.
The Allen-Bradley 1606-XLBUFFER Power Supply Module and the entire Bulletin 1606 product line of switched-mode power supplies are compliant with the global single and 3-phase application requirements. These modules are specially designed to accept both DC and AC input voltages. Additionally, they are pre-tested and approved to meet international safety standards. The other notable specifications of the 1606-XLBUFFER Power Supply include buffering for loads of 24 Volts, with 3.6 seconds per 1 Amp or 0.2 seconds per 20 Amps of guaranteed hold-up time. The 1606-XLBUFFER Buffer Module Power Supply and the other modules in the 1606-XL product line offer clear status update, through the status LED indicators as well as the signaling terminals. Additionally, they are approved and certified for by the UL, CUL, GOST, C, KC, and C-Tick standards.
Allen-Bradley manufactures the 1606-XLBUFFER Buffer Module Power Supply as part of the 1606 Switched Mode Power Supplies product line. It operates on an input voltage of 24 to 28.8 Volts DC.
F.A.Q for 1606-XLBUFFER
