GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1606 Power Supplies » You are here: 1606-XL240DR
1606-XL240DR
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1606-XL240DR 1606-XL240DR//A
Common misspellings:
- l606-XL240DR
- 16o6-XL240DR
- 1606-X1240DR
- 1606-XL2A0DR
- 1606-XL24oDR
- 1606XL240DR
Technical Specifications for 1606-XL240DR
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1606 Power Supplies |
| Part number | 1606-XL240DR |
| Product type | Power supply |
| Output voltage | 24 Volts DC |
| Output current | 10 Amps |
| DC input | 240 to 375 Volts DC |
| AC input | 115/230 Volts AC |
| Inrush current | 30 Amps at 264 Volts AC |
| Efficiency | 89% |
| Heat dissipation | 26.7 Watts |
| Dimensions | 120 x 124 x 102 millimeters |
| Weight | 980 grams |
About 1606-XL240DR
The Allen-Bradley 1606-XL240DR module is a power supply module. The advantages offered by the power supply module include high short circuit current ratings and reliable operation of the secondary fuses. The input rating of the 1606-XL240DR power supply is 100 to 120 Volts AC or 200 to 240 Volts AC, and these voltages are switchable at 47 to 63 Hertz, and it also supports voltages of 85 to 132 Volts AC, 176 to 264 Volts AC, and 240 to 375 Volts DC. The output power rating is 24 Volts DC and 10 Amps. When DC input voltage is being applied, the switch should be left at the 240 Volts setting. The input current rating is less than 6 Amps with switch in the 115 Volts position and it is less than 2.8 Amps with the switch in the 230 Volts position. The inrush current is typically 30 Amps at 264 Volts AC.
The weight of the 1606-XL240DR power supply module is 980 grams. The power supply dimensions are 120 x 124 x 102 millimeters. Allen-Bradley recommends leaving 25 millimeters of free space above and below the power supply and 15 millimeters of free space to the left and right of the power supply for ventilation. Stranded wire with a 22 to 12 AWG wire size and solid wire with a 22 to 12 AWG wire size is recommended for input and output connections. The recommended tightening torque is 0.4 N-m. The input and output connections on the 1606-XL240DR power supply module are pluggable by means of a Combicon plug connector. The typical efficiency of the power supply is 89% and the typical power dissipated as heat by the 1606-XL240DR power supply module is 26.7 Watts. The supply has a rated MTBF value of 390,000 hours.
The 1606-XL240DR power supply module is an Allen-Bradley 1606 power supply. The 1606-XL240DR module can be operated with both AC and DC input and it offers 24 Volts DC output voltage.
F.A.Q for 1606-XL240DR
