GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1203 Communication Modules » You are here: 1203-gk5
1203-gk5
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1203-gk5 1203-gk5//A
Common misspellings:
- l203-gk5
- 12o3-gk5
- 1203gk5
Technical Specifications for 1203-gk5
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1203 Communication Modules |
| Part Number | 1203-GK5 |
| Type | Communication module |
| Network | DeviceNet |
| Input Voltage | 12 to 25V DC |
| Input Current | 110 mA |
| SCANport Load | 60 mA DC |
| Baud Rates | 125, 250, 500 kBPS |
| Operating Temperature | 0 to 50 degrees Celsius |
| LEDs | Yes |
| Enclosure | NEMA Type 1 (IP 30) |
| DIN Rail | 35 mm x 7.5 mm (1.38 in. x 0.30 in.) |
About 1203-gk5
The 1203-GK5 module is a DeviceNet communications module that belongs to the 1203 product line by Allen-Bradley. This module can be mounted on a DIN rail and it is connected to the SCANport products via a SCANport cable. This device provides a communications interface between a DeviceNet network and any compatible SCANport product. The DeviceNet network is widely known in the industry as an open, global industry-standard communication network that offers an interface through a single cable. This interface can be developed through a programmable controller directly to smart devices such as sensors, pushbuttons, motor starters, and drives. The Allen-Bradley 1203-GK5 DeviceNet communications module comes with DIP switches that enable the users to configure the module before connecting it to the network.
Other features that come with the Allen-Bradley 1203-GK5 DeviceNet communications module are a faulted node recovery mode that lets the users change the node address of a device and a user fault response setting that provides the users with the ability to customize the adapter actions. Other important connectors are the 5-pin plug-in connector and the 10-pin plug-in connector. The module operates with an input voltage of 12 to 25 Volts DC and an input current of 110 milliamps. This module supports connections with SCANport products with up to 6 peripherals. The most common product lines that are fully compatible with the module are the 1336 family of drives, and the 1394 family of motion control systems, among others. The physical parts of the Allen-Bradley 1203-GK5 DeviceNet communications module are a DeviceNet connection point, a bi-color LED, SCANport connections, DIN rail mounting hardware, and DIP switches.
The Allen-Bradley 1203-GK5 module is a DeviceNet communications module. It operates with an input voltage of 12 to 25 Volts DC and an input current of 110 milliamps.
F.A.Q for 1203-gk5
