GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1203 Communication Modules » You are here: 1203-cn1
1203-cn1
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Product Description
The Allen-Bradley/Rockwell Automation 1203-CN1 module from the 1203 Communication Module series is made to connect 1 SCANport device to the ControlNet industrial network. It can be mounted on a DIN rail.
Other Available Revisions for the 1203-cn1 1203-cn1//A
Common misspellings:
- l203-cn1
- 12o3-cn1
- 1203-cnl
- 1203cn1
Technical Specifications for 1203-cn1
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1203 Communication Modules |
| Part Number | 1203-CN1 |
| Product Type | Communication Module |
| Network | ControlNet |
| Number of SCANport Devices Supported | 1 |
| Cable Type | SCANport Cables |
| Number of Required Cable Taps | 1 or 2 |
| RS-232 Port | Included |
| Mounting | DIN rail |
About 1203-cn1
The 1203-CN1 module from Allen-Bradley/Rockwell Automation is a 1203 series ControlNet communication module. It allows industrial devices to communicate over the ControlNet network. This module is meant to be an interface between the ControlNet network and any device with a SCANport port (the 1203-CN1 module is also known as a “SCANport peripheral device” because of its compatibility with the SCANport.) Note that the 1203-CN1 module can only connect to 1 SCANport device at a time. The module’s components include DIN rail mounting connectors, ControlNet coax connectors, LED indicators, a ControlNet network access port, and an RS-232 serial port.
The Allen-Bradley/Rockwell Automation 1203-CN1 ControlNet communication module uses a SCANport cable and either 1 or 2 ControlNet cable taps to make a connection between a single SCANport device and the ControlNet network. Different SCANport cables are available that are appropriate for different kinds of connections to different SCANport devices. The module cannot communicate unless the SCANport device that it is connected to is powered up and operational. The module and its connected devices must always be protected from ESD or electrostatic discharge. The 1203-CN1 communication module can be removed when necessary, but in order for the module to be removed safely, the power supply must be turned off and it and all the cables that are connected to the module must be disconnected first. Then the connection tabs that hold the 1203-CN1 module on the DIN rail can be released and the module can be removed.
The Allen-Bradley/Rockwell Automation 1203-CN1 module from the 1203 Communication Module series is made to connect 1 SCANport device to the ControlNet industrial network. It can be mounted on a DIN rail.
F.A.Q for 1203-cn1
