GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1203 Communication Modules » You are here: 1203-GK2
1203-GK2
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1203-GK2 1203-GK2//A
Common misspellings:
- l203-GK2
- 12o3-GK2
- 1203GK2
Technical Specifications for 1203-GK2
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1203 Communication Modules |
| Part Number | 1203-GK2 |
| Type | Communication module |
| Input Voltage | 24V DC, +/- 10% |
| Baud rates | 57.6K, 115.2K, and 230.4K baud |
| Input Current | 0.4 A maximum |
| SCANport Load | 60mA (DC) |
| Dimensions | 45 x 76 x 123 mm |
| Enclosure type rating | NEMA Type 1 (IP 30) |
| LED | Yes |
| Operating Temperature | 0 to 50 degrees Celsius |
| Relative Humidity | 0 to 95%, non-condensing |
About 1203-GK2
The 1203-GK2 Serial Communications Module is a module that has been manufactured by Allen-Bradley and included in the 1203 series. This module employs the RS232/422/485 ports communication ports by using the DF1 protocol. The purpose of this module is to offer the users an interface device with the ability to connect serial communication devices and controllers that use SCANport technology. This specific module comes in an enclosure and operates with a DC voltage. The installation of the Allen-Bradley 1203-GK2 Serial Communications Module includes mounting the communications module and configuring it so that it can fulfill its purpose. Switches can be used to select the baud rate, the parity, the number of stop bits, and the checksum mode in the module. This module needs to be mounted on a panel or on a DIN rail.
The Allen-Bradley 1203-GK2 Serial Communications Module comes with a NEMA Type 1 enclosure that protects the module against solid particles that can enter the internal parts of the module and cause malfunctioning. This enclosure does not protect the module against liquids and contact with corrosive vapors or gasses. The Allen-Bradley 1203-GK2 Serial Communications Module operates with a voltage of 24 Volts DC and a tolerance of +/-10% and with an input current of 0.4 Amps maximum. The module can operate at a temperature range of 0 to 50 degrees Celsius and a relative humidity range of 5 to 95 percent without condensation. Through this module, compatible devices can transfer data, messages, and information as long as they are all compatible with the DF1 protocol.
The Allen-Bradley 1203-GK2 Serial Communications Module operates at a voltage range of 24 Volts DC. It has baud rates of 57.6K, 115.2K, and 230.4K baud.
F.A.Q for 1203-GK2
