GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » 1203 Communication Modules » You are here: 1203-GD2
1203-GD2
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1203-GD2 1203-GD2//A1203-GD2//B1203-GD2//C
Common misspellings:
- l203-GD2
- 12o3-GD2
- 1203GD2
Technical Specifications for 1203-GD2
| Brand | Allen-Bradley / Rockwell Automation |
|---|---|
| Series | 1203 Communication Modules |
| Part Number | 1203-GD2 |
| Type | Communication module |
| Input Voltage | 85 to 264V AC, 1-phase |
| Input Frequency | 45 to 63 Hz |
| Input Current | 35 mA maximum |
| SCANport Load | 60 mA |
| Dimensions | 45 x 76 x 123 mm |
| Enclosure Type Rating | NEMA Type 1 (IP 30) |
| LED | Yes |
| Operating Temperature | 0 to 50 degrees Celsius |
| Relative Humidity | 0 to 95%, non-condensing |
About 1203-GD2
The 1203-GD2 module is a communication module that has been manufactured by Allen-Bradley. This module can provide a direct and digital link between serial communications devices and other devices that use the SCANport communication method. This module belongs to the 1203 series and it can be used with different controllers from the 1305, 1336 PLUS, FORCE, and SMP3 series. This specific module comes with an enclosure that provides it with a degree of protection against harsh environmental conditions. The Allen-Bradley 1203-GD2 communication module needs to be mounted independently since the enclosure enables it to do so. Physically, the module contains a SCANport connector, a serial channel D-Shell connector, a power connection, and diagnostic LEDs.
The Allen-Bradley 1203-GD2 communication module comes with three DIP switches. It can operate in specific environmental conditions that consist of a temperature range of 0 to 50 degrees Celsius, and a relative humidity range of 0 to 95 percent without condensation. The Allen-Bradley 1203-GD2 communication module has an input voltage range of 85 to 264 Volts AC, it operates with single-phase voltage and with a frequency of 45 to 63 Hertz. The module has an input current of 35 milliamps maximum and a SCANport Load of 60 milliamps. The connections to the device are made through a SCANport peripheral interface and the RS-232, RS-485, and RS-422 ports. The specific NEMA rating for the module is NEMA type 1 which is equivalent to the IP 30 environmental protection rating and it has a width of 45 millimeters, a height of 76 millimeters, and a depth of 123 millimeters.
The Allen-Bradley 1203-GD2 communication module has an input voltage of 85 to 264 Volts AC and an input current of 35 milliamps. It operates with a frequency of 50 to 60 Hertz.
F.A.Q for 1203-GD2
