1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

6236BP10830-Battery

ABB Taylor Mod 300 | 623 624 Series | 6236BP10830 | Image

SKU 2177118  UPC 0387562887653

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

The 6236BP10830 Terminal Assembly is designed for the 6236B Current Source Output Block made by ABB. It comes with 6 output channels, 4 pounds of weight, 12 Watts of heat dissipation, and 32 terminals. All the field wiring of the TRIO I/O block can be done through the 6236BP10830 Terminal Assembly. Terminal 1 to Terminal 4 of the module accepts one AWG #12 or 2 AWG#14 wires and Terminals 5 to 32 accept wires within the AWG #22 to AWG #14 gauge range. Use the VOUT terminal and the RTN terminal for wiring the current outputs. The VOUT and RTN terminals are suitable for output loads which require 0 to 5 Volts of power with the jumper installed across the RTN and JMP terminals.

 

The 6236BP10830 Terminal Assembly acts as the wiring interface between the field devices and the I/O module. It must be permanently installed in an I/O block and it only accepts its compatible electronics assembly. If the users need to remove the terminal assembly without interrupting the whole system, the communication between the devices must be assured by crimping or soldering the bus wires together. When upgrading the terminal block assembly, the electronic assembly of the system must be renewed to the corresponding model. The 6236BP10830 Terminal Assembly is installed between the electronic assembly of the module and the field connections. The fifth terminal can be used to ground the module. The user must perform proper grounding to avoid unnecessary damage. The power supply can be connected to Terminals 6 and 7. Terminals 9 and 10 are reserved for the BSM module.

Terminal Assembly for 6236BP10810

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.