1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

HE693DAC410

★ ★ ★ ★ ★ Rated 4.6/5 Based on 17 ratings.

Rate your purchase of the HE693DAC410
Horner Electric | Horner Electric | HE693DAC410 | Image

SKU 2172138  UPC 0352194523439

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Reman

$1470

1 In Stock

✓  2 Year PDF Supply Warranty

*What is Remanufactured?

Ships .

Repair Service

$1176

Save $294

5-10 Days

✓  2 Year PDF Supply Warranty

*What is Fast Repair?

Repair Completion:
5-10 Days

Other Available Revisions for the HE693DAC410 HE693DAC410AHE693DAC410BHE693DAC410CHE693DAC410DHE693DAC410EHE693DAC410FHE693DAC410GHE693DAC410HHE693DAC410IHE693DAC410JHE693DAC410KHE693DAC410LHE693DAC410MHE693DAC410NHE693DAC410OHE693DAC410PHE693DAC410QHE693DAC410RHE693DAC410SHE693DAC410THE693DAC410UHE693DAC410VHE693DAC410WHE693DAC410XHE693DAC410YHE693DAC410Z

Common misspellings:
  • HE693DACA10
  • HE693DAC4l0
  • HE693DAC41o
  • HE693DAC410

The HE693DAC410 provides four analog output channels, with 14-bits of resolution, and 1500VAC (RMS) isolation channel-to-channel and channel-to-ground. The module converts digital values (-32,000 to +32,000) residing in %AQ registers to analog voltage signals (-10 to +10V). The %AQ values are set by the ladder logic program in the PLC CPU. The module may be set to "default to 0V" or "hold last state" when the PLC is taken out of RUN mode. This is accomplished with a configuration parameter in the configuration software.

Technical Specifications

Power Consumption 100mA @ 5VDC / 120mA @ 24VDC
Number of channels 4
Current Surge on Power-up 250mA for 10ms. @ 5VDC / 900mA for 30ms. @ 24VDC
I/O Required 4 %AQ
Output Range +/- 10VDC
D/A Resolution 13 bits plus sign
Maximum Linearity Error ≥ 2kohms
Voltage Output Resolution 1.25mV
Common Mode Isolation 1500VAC (RMS), +/- 2000VDC
Channel to Channel 1500VAC (RMS), +/- 2000VDC
Operating Temperature 0 to 60°C
Relative Humidity 5% to 95%, non-condensing

Technical Information

Power Consumption 100mA @ 5VDC / 120mA @ 24VDC
Number of channels 4
Current Surge on Power-up 250mA for 10ms. @ 5VDC / 900mA for 30ms. @ 24VDC
I/O Required 4 %AQ
Output Range +/- 10VDC
D/A Resolution 13 bits plus sign
Maximum Linearity Error ≥ 2kohms
Voltage Output Resolution 1.25mV
Common Mode Isolation 1500VAC (RMS), +/- 2000VDC
Channel to Channel 1500VAC (RMS), +/- 2000VDC
Operating Temperature 0 to 60°C
Relative Humidity 5% to 95%, non-condensing
  • Question: What is a HE693DAC410? Answer: The HE693DAC410 provides four analog output channels, with 14-bits of resolution, and 1500VAC (RMS) isolation channel-to-channel and channel-to-ground. The module converts digital values (-32,000 to +32,000) residing in %AQ registers to analog voltage signals (-10 to +10V).
  • Question: What is the main power supply for the HE693DAC410? Answer: The main power source for the HE693DAC410 uses 100mA @ 5VDC  or 120mA @ 24VDC.
  • Question: How can I minimize capacitive loading and noise? Answer: Shielded, twisted-pair extension wiring offers the best noise immunity. 
  • Question: Where should the shields be connected to? Answer: If shielded wiring is used, a good earth ground connection is critical. If shields are connected at the module end, terminals 9, 10, 19 and 20 are used as the shield ground point.
  • Question: Can I change the number of channels or the voltage on this device? Answer: Yes, you can. This is a 4 channel unit.

 

PDFsupply Tech

The HE693DAC410 provides four output channels and 1500VAC isolation channel to channel and channel to ground. The max power consumption is 100mA @ 5VDC and 120mA @24VDC, which is higher than the max power consumption of HE693DAC420 which is 90mA @ 5VDC.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.