1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

HE670ADC830

★ ★ ★ ★ ★ Rated 4.5/5 Based on 10 ratings.

Rate your purchase of the HE670ADC830
Horner Electric | Horner Electric | HE670ADC830 | Image

SKU 2173009  UPC 0775413913673

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Reman

$1208

3 In Stock

✓  2 Year PDF Supply Warranty

*What is Remanufactured?

Ships .

Repair Service

$967

Save $241

5-10 Days

✓  2 Year PDF Supply Warranty

*What is Fast Repair?

Repair Completion:
5-10 Days

Other Available Revisions for the HE670ADC830 HE670ADC830AHE670ADC830BHE670ADC830CHE670ADC830DHE670ADC830EHE670ADC830FHE670ADC830GHE670ADC830HHE670ADC830IHE670ADC830JHE670ADC830KHE670ADC830LHE670ADC830MHE670ADC830NHE670ADC830OHE670ADC830PHE670ADC830QHE670ADC830RHE670ADC830SHE670ADC830THE670ADC830UHE670ADC830VHE670ADC830WHE670ADC830XHE670ADC830YHE670ADC830Z

Common misspellings:
  • HE67oADC830
  • HE670ADCb30
  • HE670ADC83o
  • HE670ADC830

The HE670ADC830 is compatible with GE Fanuc Field Control. It provides eight analog channels with a resolution of 12-bits (11 bits plus sign). Isolation levels are 400VDC, 1000VDC channel-to-channel and channel-to-ground. The module converts the voltage input signals into digital values (-10,000 to +10,000 normally), which can be accessed through communications with the Bus Interface Unit. These modules are physically housed in the standard Field Control I/O case, and are compatible with a variety of I/O bases, providing flexible termination options.

Technical Specifications

Power Consumption 130mA from backplane
Number of Channels 8
Range 0 to +10VDC -10 to +10VDC Selectable by the BIU
Channel –to– Channel Isolation 400VDC
Channel –to– Backplane Isolation 1000VDC
Input Impedance 1 Mohm
Resolution (0 to +10) (-10 to +10) 12-bits 11-bits + sign
Output Format Set by BIU, Normally 10V = 10000 counts
Maximum error at 25°C +/- 0.1% Full Scale
Operating Temperature 0 to 75°C
Relative Humidity 5% to 95%, non-condensing
Input Power 24VDC +/-10%

 

Technical Information

Power Consumption 130mA from backplane
Number of Channels 8
Range 0 to +10VDC -10 to +10VDC Selectable by the BIU
Channel –to– Channel Isolation 400VDC
Channel –to– Backplane Isolation 1000VDC
Input Impedance 1 Mohm
Resolution (0 to +10) (-10 to +10) 12-bits 11-bits + sign
Output Format Set by BIU, Normally 10V = 10000 counts
Maximum error at 25°C +/- 0.1% Full Scale
Operating Temperature 0 to 75°C
Relative Humidity 5% to 95%, non-condensing
Input Power 24VDC +/-10%
  • Question: What is a HE670ADC830? Answer: The HE670ADC830 is compatible with GE Fanuc Field Control. It provides eight analog channels with a resolution of 12-bits (11 bits plus sign). Isolation levels are 400VDC, 1000VDC channel-to-channel and channel-to-ground. The module converts the voltage input signals into digital values (-10,000 to +10,000 normally), which can be accessed through communications with the Bus Interface Unit. These modules are physically housed in the standard Field Control I/O case, and are compatible with a variety of I/O bases, providing flexible termination options.
  • Question: What is the main power consumption for the HE670ADC830? Answer: The main power source for this unit uses 130mA from a backplane. 
  • Question: How can I minimize capacitive loading and noise? Answer: Shielded, twisted-pair extension wiring offers the best noise immunity. 
  • Question: Where should the shields be connected to? Answer: If shielded wiring is used, a good earth ground connection is critical. Connect all shield points to a good earth ground.
  • Question: Can I change the number of channels or the voltage on this device? Answer: Yes, you can. This is an 8 channel unit.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.