GE / IP FANUC Series 90/30 In Stock
IC695PSA040
RX3i PSA040 Power Supply
SKU 2171039 UPC 037444057338
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC695PSA040 IC695PSA040AIC695PSA040EIC695PSA040FIC695PSA040GIC695PSA040HIC695PSA040JIC695PSA040KIC695PSA040-LT
Common misspellings:
- 1C695PSA040
- IC695PSAo40
- IC695PSA0A0
- IC695PSA04o
- IC695PSA040
Technical Specifications for IC695PSA040
| Manufacturer | GE Fanuc |
|---|---|
| Series | RX3i PACSystems |
| Part Number | IC695PSA040 |
| Product Type | Power Supply Module |
| Voltage Type | AC and DC |
| AC Voltage Range | 85 to 264 Volts AC |
| DC Voltage Range | 100 to 300 Volts DC |
| Input Power at a Full Load | 70 Watts |
| Backplane Isolation | 250 Volts AC Continuous, and 1500 Volts AC for 1 Minute |
| Backplane | RX3i Universal Backplane |
Product Description
The IC695PSA040 is a 120/240 volt AC or 125 volt DC, 40 Watt Power Supply from the GE Fanuc RX3i Series. It can work with an input source of either alternating or direct current. Its operating voltage is 85-264 VAC or else 100-300 VDC.
The RX3i power supply has three outputs:
+3.3 VDC - for internal use by RX3i modules that have IC695 catalog numbers.
+5.1 VDC
+24 VDC relay - can be used to power circuits on Output Relay modules.
The PACSystems RX3i power supply is a scalable, rack-based system, which provides fast and consistent control between separate modules. Users can develop and maintain their own custom control functions. This includes visualisation, motion, and networking.
Another great feature is the PACMotion Controller that provides all the flexibility and machine logic necessary to use advanced machine automation in your business.
Though designed specifically to support the PACSystem RX3i, only one IC695PSA040 power supply can be installed in the Universal Backplane at a time. The power supply is not compatible with other RX3i supplies, either in increased capacity or redundant modes.
The power supply has four LEDs that indicate the power supply’s status. The power LED is the top one and will be green when power is supplied to the backplane or amber if the power supply switch is off. When the P/S Fault LED glows red, the supply has failed and is not supplying voltage to the backplane. When the power supply is close to the maximum operating temperature or is above it, the Overtemp LED glows amber. When the power supply is close to or over the maximum output capability on any output, the Overload LED glows amber.
It is important that the door of this unit remains closed during operation. This prevents against shock hazards, which could cause severe or fatal injuries.
Technical Specifications
| Rated Voltage: | 120/240 VAC or 125 VDC |
| Input Voltage Range: | 85 to 264 VAC or 100 to 300 VDC |
| Number of Slots: | 2 |
| Output Power: | 40 Watts max |
| Output Voltage: | 24 VDC, 5.1 VDC or 3.3 VDC |
| Output Current: | 0-1.6 A, 0-6 A, or 0-9 Amps |
The IC695PSA040 module is an industrial power supply module from the GE Fanuc RX3i PACSystems series that is made to supply the power to devices in the RX3i PACSystems PLCs. The IC695PSA040 power supply module can provide devices with AC voltage in the range of 85 to 264 Volts AC, and with DC voltage in the range of 100 to 300 Volts DC. Its maximum input power rating at a full load is 70 Watts. The nominal input voltage ratings of the IC695PSA040 power supply module are 120/240 Volts AC and 125 Volts DC. It supports isolation between the input and the backplane that is rated at 250 Volts AC continuously and at 1500 Volts AC for 1 minute.
The GE Fanuc IC695PSA040 RX3i PACSystems power supply module has 3 different outputs. The first output is the 3.3 Volts DC rated output that is meant for connecting to other RX3i PACSystems modules that are part of the RX3i IC695 product line. The second output is rated at 5.1 Volts DC, and the third output is rated at 24 Volts DC and it is meant to power the circuits on compatible output relay modules. The IC695PSA040 power supply module should never be installed on any backplane that is not an RX3i PACSystems universal backplane, and only 1 IC695PSA040 power supply module can be used at a time in an RX3i PACSystems PLC. This power supply cannot be used in any kind of redundancy system. This power supply module is scalable and it comes with machine logic.
Technical Information
Specifications:
|
Nominal Rated Voltage Input Voltage Range AC DC |
120/240 VAC or 125 VDC
85 to 264 VAC 100 to 300 VDC |
|
Input Power (Maximum with Full Load) |
70 Watts maximum |
|
Inrush Current |
4 Amps, 250 milliseconds maximum * |
|
Output Power |
40 Watts maximum total 5.1 VDC = 30 Watts maximum 3.3 VDC = 30 Watts maximum The maximum total output power available depends on the surrounding air temperature, as shown. |
|
Output Voltage |
24 VDC: 19.2 VDC to 28.8 VDC 5.1 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal) 3.3 VDC: 3.1 VDC to 3.5 VDC (3.3 VDC nominal) |
|
Output Current |
24 VDC: 0 to 1.6 Amps 5.1 VDC: 0 to 6 Amps 3.3 VDC: 0 to 9 Amps |
|
Isolation (input to backplane): |
250 VAC continuous; 1500 VAC for 1 minute |
|
Ripple (all outputs) |
150 mV |
|
Noise (all outputs) |
150 mV |
|
Ride-through time |
20 ms. This is the length of time the Power Supply maintains valid outputs if the power source is interrupted |
|
Wiring Terminals |
Each terminal accepts one 14 AWG to 22 AWG wire. |
|
Current per Terminal |
6 Amps |
|
Number of Daisy-Chained PSA040 Supplies |
Up to 4 |
Troubleshooting
Troubleshooting IC695PSA040
Troubleshooting information is available on IC695PSA040's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC695PSA040
PDF Supply can repair your IC695PSA040 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC695PSA040? Answer: The IC695PSA040 is a 120/240 VAC or 125 VDC, 40 Watt Power Supply from the GE Fanuc RX3i Series.
- Question: From what input voltage source range does IC695PSA040 operate? Answer: This power supply operates from an input voltage source range of 85 to 264 VAC or 100 VDC to 300 VDC.
- Question: What 3 outputs does this power supply have? Answer:
- +5.1 VDC output
- +24 VDC relay output that can be used to power circuits on Output Relay modules
- +3.3 VDC which, is used internally by RX3i modules with IC695 catalog numbers
- Question: How many IC695PSA040's can be installed in a PACSystems RX3i Universal Backplane? Answer: Only 1
- Question: With what can IC695PSA040 not be used? Answer: This power supply cannot be used with other RX3i power supplies in redundant or increased capacity modes.
- Question: What do the 4 LEDs indicate? Answer:
- Power (Green/Amber). When this LED is green, it indicates power is being supplied to the backplane. When this LED is amber, power is applied to the power supply, but the power supply switch is off.
- P/S Fault (Red). When this LED is lit, it indicates the power supply has failed and is no longer supplying sufficient voltage to the backplane.
- Over Temperature (Amber). When this LED is lit, it indicates the power supply is near or exceeding its maximum operating temperature.
- Overload (Amber). When this LED is lit, it indicates the power supply is near or exceeding its maximum output capability on at least one of its outputs.
- Question: What should I do if my IC695PSA040 is not working properly? Answer: Your IC695PSA040 may need repair.
For more information on the IC695PSA040 120/240 VAC or 125 VDC, 40 Watt Power Supply of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
Revision History
|
Version |
Date |
Details |
|
IC695PSA040J |
May 2013 |
Increases the margin of the 5V and 3.3V under voltage detectors to prevent PS faults during power-up. |
|
IC695PSA040H |
Aug. 2012 |
Resolves an issue with powering up under light loads. |
|
IC695PSA040G |
Jun. 2011 |
Hardware modification improves radiated RF susceptibility and removes the requirement to install control systems that use this product in a grounded metal enclosure to meet the EU EMC Directive. |
|
IC695PSA040F |
Sep. 2006 |
Hardware modification. Previous versions of this Power Supply occasionally failed to power up when installed in a 16-Slot Universal Backplane, IC695CHS016. This update resolves the issue. |
|
IC695PSA040E |
Mar. 2006 |
The D version of this Power Supply (IC695PSA040D) incorrectly reported that it was a PSA140 power supply, causing a Configuration Mismatch error. The E version and versions prior to D report their identification correctly. |
|
IC695PSA040A |
Oct. 2005 |
Initial release |
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
