GE / IP FANUC Series 90/30 In Stock
IC694MDL740
RX3i MDL740 Digital I/O
SKU 2175047 UPC 0117007557731
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC694MDL740 IC694MDL740AIC694MDL740BIC694MDL740-LT
Common misspellings:
- 1C694MDL740
- IC69AMDL740
- IC694MD1740
- IC694MDL7A0
- IC694MDL74o
- IC694MDL740
Technical Specifications for IC694MDL740
| Manufacturer | GE Fanuc |
|---|---|
| Series | RX3i PACSystems |
| Part Number | IC694MDL740 |
| Product Type | Output Module |
| Number of Outputs | 16 |
| Number of Output Groups | 2 |
| Current Draw | 110 Milliamps at 5 Volts DC |
| Logic Type | Positive |
| Module Type | Low-Voltage Module |
| Operating Voltage | 12 to 24 Volts DC |
Product Description
The IC694MDL740 is a 16-Point, 12/24 volt DC, 0.5 Amp, Positive Logic, Output module from the GE Fanuc RX3i Series. This module provides 16 output points in 2 groups of eight. See specifications for this unit on IC694MDL740's website page.
Technical Specifications
| Rated Voltage: | 12/24 volts DC |
| # of Outputs: | 16 (2 groups of 8) |
| Freq: | N/A |
| Output Current: | 0.5 A per point |
| Output Voltage Range: | 12 to 24VDC (+20%, -15%) |
| Power Consumption: | 110 mA from 5V bus |
The GE Fanuc IC694MDL740 output module is manufactured as a member of the GE Fanuc RX3i PACSystems series to be connected to an RX3i PACSystems PLC or programmable logic controller system. This output module has 16 outputs that are arranged into 2 groups that contain 8 outputs each. All of the output points have LED status indicators that light up when their corresponding output points are powered on. This output module is a positive logic output module. When it is installed in the RX3i PACSystems PLC, the IC694MDL740 output module draws its power from the PLC backplane that it is installed in. It only needs 5 Volts DC of voltage from the backplane bus in order to operate, and it draws 110 milliamps of current from the backplane at this voltage level.
The GE Fanuc IC694MDL740 16-point positive logic output module is a low-voltage output module. It is clearly identified as a low-voltage output module by its blue label. The IC694MDL740 low-voltage output module should not be used with high-voltage devices since this may cause damage to it or the high-voltage devices, or the IC694MDL740 module will simply be unable to function or communicate with these devices. This module’s operating voltage range is from 12 to 24 Volts DC, and its isolation voltage rating is 250 Volts AC for continuous isolation, but the isolation voltage rating can also reach as high as 1500 Volts AC for 1 minute. The IC694MDL740 output module can be mounted in any empty I/O slot in any rack within the RX3i PACSystems PLC.
Technical Information
Specifications:
|
Rated Voltage |
12/24 Vdc |
|
Output Voltage Range |
12 to 24 Vdc (+20%, -15%) |
|
Outputs per Module |
16 (two groups of eight outputs each) |
|
Isolation: |
|
|
Field to Backplane (optical) and to Frame Ground |
250 V ac continuous; 1500 V ac for 1 minute |
|
Group to Group |
250 V ac continuous; 1500 V ac for 1 minute |
|
Output Current |
0.5 Amps maximum per point |
|
|
2 Amps maximum per common |
|
Power Consumption |
110mA (all outputs on) from 5 volt bus on backplane |
|
Output Characteristics |
|
|
Inrush Current |
4.78 Amps for 10 ms |
|
Output Voltage Drop |
1 volt maximum |
|
Off–state Leakage |
1mA maximum |
|
On Response Time |
2ms maximum |
|
Off Response Time |
2ms maximum |
Troubleshooting
Troubleshooting IC694MDL740
Troubleshooting information is available on IC694MDL740's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC694MDL740
PDF Supply can repair your IC694MDL740 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC694MDL740? Answer: The IC694MDL740 is a 16-Point, 12/24 VDC, 0.5 Amp, Positive Logic, Output module from the GE Fanuc RX3i Series.
- Question: What does IC694MDL740 provide? Answer: This module provides 16 output points in 2 groups of 8.
- Question: What characteristics does the IC694MDL740 have? Answer: This module has positive logic characteristics; it sources current to the loads from the user common or positive power bus.
- Question: How are output devices connected? Answer: They are connected between the negative power bus and the module terminals.
- Question: With what are IC694MDL740's outputs characteristics compatible? Answer: They are compatible with motor starters, solenoids, and indicators.
- Question: What do the green LED lights indicate? Answer: The 16 green LED lights indicate ON/OFF status of the points 1 thru 16
- Question: The blue bands on the label indicate what? Answer: The blue bands let you know that the IC694MDL740 is a low-voltage module.
- Question: Into what slot can the IC694MDL740 be installed? Answer: This module can be installed in any I/O slot of an RX3i system.
- Question: What should I do if my IC694MDL740 is not working properly? Answer: Your IC694MDL740 may need repair.
For more information on the IC694MDL740 16-Point, 12/24 VDC, 0.5 Amp, Positive Logic, Output Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
