GE / IP FANUC Series 90/30 In Stock
IC694MDL241
RX3i MDL241 Digital I/O
SKU 2178049 UPC 0913170302679
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC694MDL241 IC694MDL241AIC694MDL241BIC694MDL241-LT
Common misspellings:
- 1C694MDL241
- IC69AMDL241
- IC694MD1241
- IC694MDL2A1
- IC694MDL24l
- IC694MDL241
Product Description
IC694MDL241 is a 24 VAC / VDC 16-Point C Positive / Negative Logic Input Module manufactured by GE Fanuc. It is equipped with 16 input points in a single group with a common power input terminal. This module can be used with either AC or DC field inputs. In DC mode, it can be wired for positive or negative logic. Input characteristics are matched with a number of input devices, including pushbuttons, limit switches, and electronic proximity switches. Current entering an input point will result in a logic 1 in the input status table (%I). Power is user-supplied to operate AC input devices. DC inputs, however, can be powered by the 24V backplane supply. Green LEDs indicate the ON/OFF status of 16 points. Blue bands located on the label show that the IC694MDL241 module is low-voltage. This module can be installed in any Rx3i system I/O slot.
Technical Specifications
| Rated Voltage: | 24 volts AC or DC |
| # of Inputs: | 16 (one group) |
| Freq: | 50/60 Hz (AC) |
| Input Current: | 7 mA |
| Input Voltage Range: | 0 to +30VDC or 0 to +30VAC |
| Power Consumption: | 80 mA from 5V bus, 125 mA from 24V supply |
Technical Information
Specifications:
|
Rated Voltage |
24 Vac or 24 Vdc |
|
Input Voltage Range |
0 to +30 Vdc or 0 to +30 Vac, 50/60Hz |
|
Inputs per Module |
16 (one group with a single common) |
|
Isolation: Field to Backplane (optical) and to frame ground |
250 Vac continuous; 1500 Vac for one minute |
|
Input Current |
7 mA (typical) at rated voltage |
|
Input Characteristics |
|
|
On–state Voltage |
11.5 to 30 Vac or DC |
|
Off–state Voltage |
0 to +4 Vac or DC |
|
On–state Current |
3.2mA minimum |
|
Off–state Current |
1 mA maximum |
|
On response Time |
12 ms typical |
|
Off response Time |
28 ms typical |
|
Power Consumption: 5 Vdc |
80 mA (all inputs on) from 5 Vdc bus on backplane |
|
Power Consumption15: 24 Vdc |
125 mA from the Isolated 24 Vdc backplane bus or from user supplied power |
Troubleshooting
Troubleshooting IC694MDL241
Troubleshooting information is available on IC694MDL241's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC694MDL241
PDF Supply can repair your IC694MDL241 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC694MDL241? Answer: The IC694MDL241 is a 16-Point, Positive/Negative Logic, 24 VAC/VDC, Input module from the GE Fanuc RX3i Series.
- Question: What does IC694MDL241 provide? Answer: This module provides 16 input points in one group with a common power input terminal.
- Question: Can IC694MDL241 be used with AC or DC field inputs? Answer: This module can be used with both AC AND DC field inputs.
- Question: What happens in DC mode? Answer: In DC mode, it can be wired for either positive or negative logic.
- Question: With what are the input characteristics compatible? Answer: he input characteristics are compatible with a wide range of input devices, such as pushbuttons, limit switches, and electronic proximity switches.
- Question: Current into an input point results in what? Answer: Current into an input point results in a logic 1 in the input status table (%I).
- Question: By what must power to operate AC input devices be supplied? Answer: It must be supplied by the user.
- Question: DC Inputs can be powered by what? Answer: They can be powered by the backplane 24V supply.
- Question: 16 green LEDs indicate what? Answer: 16 green LEDs indicate the ON/OFF status of points 1 through 16.
- Question: The blue bands on the label let you know what? Answer: They let you know that IC694MDL241 is a low-voltage module.
- Question: Into what slot can IC694MDL241 be installed? Answer: This module can be installed in any I/O slot of an RX3i system.
- Question: What should I do if my IC694MDL241 is not working properly? Answer: Your IC694MDL241 may need repair.
For more information on the IC694MDL241 16-Point, Positive/Negative Logic, 24 VAC/VDC, Input Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
