1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC694DNM200-Repair

★★★★★Rated 4.6/5 Based on 9 ratings.

Rate your purchase of the IC694DNM200

SKU 2173427  UPC 0799705793415

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description


IC694DNM200 is a GE Fanuc manufactured DeviceNet Master Module for the RX3i series. The single-slot module enables the CPU to send and receive information over the DeviceNet network. It can server as a master to 63 “slaves” on the network. Moreover, it can also be configured to act as a slave to another master module located on the bus. The module can be installed on any I/O slot in the RX3i or 90-30 series backplane. It is compatible with any CPU in the 90-30 series as well as PACSystems Rx3i CPU model IC695CPU310 release 3.5 and later. It is not compatible with VersaPro or LogicMaster programming software or the 90-30 series handheld programmer IC693PRG300.  The IC694DNM200 master module is compatible with any CPU in the 90-30 series with exception of IC693CPU321 or IC693CPU340 release 8.0 and later firmware.

The IC694DNM200 runs on DeviceNet protocol and 5 VDC with a current of 450mA. It supports baud rates of 125K, 250K, and 500K of the DeviceNet network. On the master module, be sure to locate 3 LEDs that display communication and operating status. They are labeled Net Power, Mod Status and Net Status. Directly below the LEDs is the sSerial port RS-232 used for connecting the master module to a PC during firmware updates. Devices are connected to the trunk cable or to drop lines, which are joined to the trunk cable with taps. Taps are mountable on panels or junction boxes. Recommended module storage ranges from -40oC to 85oC with operating temperatures of between of 0oC and 60oC.

Technical Specifications

Module Type:  DeviceNet Master 
Number of Slots:  1 (single slot)
Backplane Support:  CPU rack only
Protocol Support: DeviceNet
Entity Type: Master
Internal Power: 450 mA @ 5 VDC

 

 

DeviceNet Master Module for RX3i. Module can only be located in the CPUbase. IC694D IC694DN IC694DNM
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.