GE / IP FANUC Series 90/30 In Stock
IC694ALG390
RX3i ALG390 Analog
SKU 2170060 UPC 0799705802391
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC694ALG390 IC694ALG390AIC694ALG390-LT
Common misspellings:
- 1C694ALG390
- IC69AALG390
- IC694A1G390
- IC694ALG39o
- IC694ALG390
Product Description
IC694ALG390 is manufactured by GE Fanuc for the Rx3i PacSystem. The IC694ALG390 is a 2-channel analog module with two output channels and the capability to convert digital data. The channels update after each scan at an approximate update rate of 5 milliseconds. The IC694ALG390 module outputs can be configured to Default or Hold Last State if the CPU resets for any reason or enters stop mode.
The IC694ALG390 has a voltage range usage of -10 to +10 volts. The external voltage ranges from 18VDC to 30VDC with a 10% external voltage ripple. The module’s location is important when analyzing power sources. If the module is located in an RX3i Universal Backplane, an external source of Isolated +24 VDC is required to provide module power. If the module is located in an Expansion Backplane, its primary power source can be the Isolated +24 VDC from the backplane power supply or an external Isolated +24 VDC supply connected to the terminal block. If the external source is between 27.5-30 VDC, it takes over the module’s load from the Isolated 24 VDC system supply. An external source should be used if the user needs to maintain hold last state operation during a loss of backplane power.
Field connections should be wired using a decent grade of twisted, shielded instrumentation cable to minimize capacitive loading and noise. The shields should be connected to GND on the user terminal connector block. The GND connection provides access to the backplane (frame ground), which results in rejection of noise caused by shield drain currents.
Technical Specifications
| No. of channels: | 2 |
| Voltage Range: | -10 to +10 V |
| Calibration: | Factory (to 2.5 mV per count) |
| Update Rate: | 5 msec |
| Output Load: | 5 mA max |
| Power Consumption: | 32 mA @ +5VDC, 120 mA @ +24VDC Isolated |
Technical Information
Specifications:
|
Voltage Range |
-10 to +10 volts |
|
Calibration |
Factory calibrated to 2.5 mV per count |
|
Supply Voltage (nominal) |
+24Vdc, from isolated +24Vdc on backplane or user-supplied voltage source, and +5Vdc from backplane |
|
External Supply Voltage Range |
18Vdc to 30 V dc |
|
External Supply Voltage Ripple |
10% |
|
Update Rate |
Approximately 5ms (both channels) Update rate is application dependent. |
|
Resolution |
2.5 mV (1 LSB = 2.5 mV) |
|
Absolute Accuracy56 |
±5 mV at 25°C (77°F) |
|
Offset |
1 mV maximum, 0°C to 60°C (32°F to 140°F) |
|
Output Loading (maximum) |
5 mA (2kï— minimum resistance) |
|
Output Load Capacitance |
2000 pF, maximum |
|
Isolation, Field to Backplane (optical) and to frame ground |
250 V ac continuous; 1500 V dc for 1 minute |
|
Internal Power Consumption |
32 mA from +5Vdc supply |
|
|
120 mA from +24Vdc supply (isolated backplane or user supply) |
Troubleshooting
Troubleshooting IC694ALG390
Troubleshooting information is available on IC694ALG390's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC694ALG390
PDF Supply can repair your IC694ALG390 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC694ALG390? Answer: The IC694ALG390 is a 2 Channel, Voltage, Analog Output module from the GE Fanuc RX3i Series.
- Question: What does IC694ALG390 have and what is it capable of doing? Answer: IC694ALG390 has 2 output channels and each of those channels is capable of converting 13 bits of binary (digital) data to an analog output signal for field devices.
- Question: What does IC694ALG390 provide? Answer: This module provides outputs in the range of -10 volts to +10 volts. Both channels are updated on every scan.
- Question: How can IC694ALG390's outputs be set up? Answer: They can be set up to either Default to 0 volts or Hold-Last-State if the CPU goes to the Stop mode or Reset.
- Question: How is the selection of the output default made? Answer: It is made by a jumper on the module. (If a jumper is not installed, the outputs Hold Last State.
- Question: Into what slot can IC694ALG390 be installed? Answer: This module can be installed in any I/O slot of an RX3i system.
- Question: What is required if IC694ALG390 is located in an RX3i Universal Backplane? Answer: If this is the case, then an external source of isolated +24 VDC is required to provide power for the module.
- Question: What should I do if my IC694ALG390 is not working properly? Answer: Your IC694ALG390 may need repair.
For more information on the IC694ALG390 2 Channel, Voltage, Analog Output Module of the GE Fanuc RX3i Series, please see the Datasheet User-Manual.
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
