GE / IP FANUC Series 90/30 In Stock
IC660BBD120
SKU 2176318 UPC 0550907769321
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC660BBD120 IC660BBD120AIC660BBD120BIC660BBD120CIC660BBD120-CAIC660BBD120DIC660BBD120EIC660BBD120FIC660BBD120HIC660BBD120KIC660BBD120LIC660BBD120MIC660BBD120-M1IC660BBD120-RR
Common misspellings:
- 1C660BBD120
- IC66oBBD120
- IC6608BD120
- IC660B8D120
- IC660BBDl20
- IC660BBD12o
- IC660BBD120
Product Description
The IC660BBD120 is a high-speed GE Fanuc Input and Output block that comes with 12 inputs and four outputs. It is designed to be used with a handheld monitor and comes with an oscillator output used for displaying output signals.
The configurable and self-contained module delivers a frequency of 200k Hz that is used for industrial purposes such as motion control, material handling, turbine flow meter, and velocity measurement among others. The user can easily configure the I/O block to count up or down, count both up and down, or count the difference between fluctuating values.
The IC660BBD120 block does not need to communicate with a CPU before or during normal processes due to its direct processing engineering mode. It can automatically detect count and input as well as send output on its own. Output can be programmed to turn itself ON or OFF when an accumulated count reaches preset threshold values.
Technical Specifications
| Rated Voltage: | 93-132 VAC / 10-30 VDC |
| # of Points: | 4 Type A or 2 Type B or 1 Type C (12 inputs and 4 outputs) |
| Input Range: | 5 VDC to 30 VDC |
| Load Current: | 200 mA |
| Output Range:: | 4.75 VDC to 5.25 VDC |
| Count Rate: | High Freq. - 200 KHz, Low Freq. 40 Hz |
Technical Information
Specifications
|
GENERAL Dimensions
Operatingtemperature Storagetemperature Humidity Operating voltage (one of two sources) Frequency/ripple Required ACpower Required DC power DC power supply dropouttime AC power supply dropouttime LEDs(block) LEDs (circuit) INPUTS Input voltagerelative to DC- terminals VL+ (load voltage) Input ON: TTL single-ended non-TTLsingle-ended TTL-differential non-TTL-differential InputOFF: TTL single-ended non-TTLsingle-ended TTL-differential non-TTL-differential Inputimpedance(typical) Selectableinputfiltertimes Inputpulsewidth high-frequencyfilterselected low-frequencyfilterselected Countrate: high-frequencyfilterselected low-frequencyfilterselected OUTPUTS +5V Steady state output (01 - 04) current OSC(oscillatoroutput) Maximuminrush current Maximumcircuit overcurrent threshold Block steady state output current Output OFF leakage current Maximumswitchingfrequency Count Input to Output delay (max) Outputvoltagedrop |
8.83 h. X 3.56 w. X 4.42 d. |
|
22.44cm h. X 9.05cm w. X 11.22cm d. |
|
|
0ï‚° C to 60ï‚° C (32ï‚° F to 140ï‚° F) |
|
|
–40 ï‚° C to 100ï‚° C (–40ï‚° F to 212ï‚° F) |
|
|
5% to 95% (non-condensing) |
|
|
93V to 132V AC [or] 10V to 30V DC |
|
|
47 Hz to 63 Hz 10%maximum |
|
|
60 mA typical 250 mA typical |
|
|
200mAtypical / 300mAmax.@ 12volts |
|
|
10mSat 12 volts / 75mSat 24 volts |
|
|
1 cycle |
|
|
UnitOK,I / OEnabled |
|
|
Output status: logic side (four) |
|
|
5V DC to 30V DC |
|
|
Vin  2.0V (sourcing 1mA min) |
|
|
Vin  7.2V(sourcing1.75mAmin) |
|
|
Vin+  0.85V (sourcing 1mA min) |
|
|
Vin+  4.1V (sourcing 1mA min) |
|
|
Vin < 0.8V |
|
|
Vin < 6.0V |
|
|
Vin+ < 0.50V |
|
|
Vin+ < 4.1V |
|
|
4.0Kohms |
|
|
High (2.5ïS) or low (12.5mS) frequency |
|
|
2.5ïS minimum |
|
|
12.5mS minimum |
|
|
200kHzmaximum |
|
|
40 Hz maximum |
|
|
4.75V DC to 5.25V DC at 200mA |
|
|
0.5 amps maximum per output |
|
|
3.8Vat 4.0mA |
|
|
3 Amps per output for up to 10mS |
|
|
4 amps |
|
|
2 ampsmaximum |
|
|
10ïA(max) |
|
|
once / second(highinrush current) |
|
|
1mS plus input filter time |
|
|
2.0 volts maximum at 4 amps inrush |
|
|
0.25 volt maximum at 0.5 Amp |
Troubleshooting
Troubleshooting IC660BBD120
Troubleshooting information is available on IC660BBD120's website page; it also includes a datasheet, a user manual, and a wiring diagram.
Repair your IC660BBD120
PDF Supply can repair your IC660BBD120 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC660BBD120? Answer: The IC660BBD120 is an I/O High-Speed Counter from the GE Fanuc Genius I/O Series. It is a self-contained, configurable I/O module which provides direct processing of rapid pulse signals up to 200kHz.
- Question: What are typical applications for IC660BBD120? Answer:
- Turbine flowmeter
- Meter proving
- Velocity measurement
- Material handling
- Motion control
- Process control
- Question: What can IC660BBD120 be powered by? Answer: This block may be powered by 115 VAC and/or 10 to 30 VDC. (If the main power supply to the block is 115 VAC, then a 10 VDC to 30 VDC power source can be used as a backup.)
- Question: The IC660BBD120 provides what? Answer: This block provides 1, 2, or 4 counters of various complexity.
- Question: How many control outputs does IC660BBD120 have? Answer: It has 4 control outputs. It also provides a +5 volt DC output and a square wave oscillator output that can be used as a timing reference.
- Question: What do IC660BBD120's LEDs reference? Answer: The top 2 LEDs indicate the status of the block and the status of its communications with the CPU. The 4 smaller LEDs indicate the on/off status of each output.
- Question: What should I do if my IC660BBD120 is not functioning properly? Answer: Your product may need repair.
For more information on the IC660BBD120 High Speed Counter Block of the GE Fanuc Genius I/O Series, please see the Datasheet User-Manual.
The final letter in the part number (ex. IC660BBD120K) indicates the revision. Revision K and later use the newer style electronic housing and therefore need the newer style plastic door and may indicate some compatibility issues with the terminal strip.
Common related search terms: ConfigurationDatasheet, Emerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
