1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

pcb601

★ ★ ★ ★ ★ Rated 4.6/5 Based on 13 ratings.

Rate your purchase of the pcb601
DVT Cognex Vision | DVT Cognex | pcb601 | Image

SKU 2171416  UPC 0263496126825

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Breakout Box

Technical Information

The Pcb601 board is a DVT breakout board manufactured by Cognex Vision. It helps to connect digital I/O, power, and illumination lines to isolation modules in a system. It is powered with a 24 Volts rated power supply that is wall-mounted and it has a current rating of 1.2 Amps. The breakout board is made out of metal and plastic. It has a sturdy design and it can be mounted easily by using a DIN rail mounting base. The top part of the board is powder-coated. It has a small form factor with dimensions of 125 millimeters in width, 149 millimeters in height, and 45 millimeters in depth. The Pcb601 board has 2 main ports. The right port of the board has the I/O, the strobe, and the power terminal. The I/O lines are used without isolation. The left port is equipped with the I/O connections that are used with the isolation modules. The board has 3 different power terminals that are the Positive, GND, and Shield terminals for the industrial power supply.


The Cognex Vision Pcb601 DVT breakout board has LED indicators on it that illuminate to alert the users about different events. A 15-pin high-density D-sub connector is present on the board. A trigger button sits next to the connector on the top part of the breakout board. The Cognex Vision Pcb601 DVT breakout board is connected with the I01 unit and it will trigger an inspection if it is connected with the trigger input in the Framework software. The strobe terminals are located on the board. These terminals are activated during the image exposure time if the IO12 unit is configured in the Framework software. 

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.