1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

8MMIR

★ ★ ★ ★ ★ Rated 4.6/5 Based on 7 ratings.

Rate your purchase of the 8MMIR
DVT Cognex Vision | DVT Cognex | 8MMIR | Image

SKU 2173156  UPC 0205605870311

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

DVT 8mm Vision Sensor IR IP65

Technical Information

The 8MMIR sensor is an 8-millimeter vision sensor manufactured by DVT Cognex Vision. It is an IR lens and it comes with an IP 65 protection rating. This sensor is used for different purposes including defect detection, measurement taking, and reading codes. It is water resistant and it can be used for outdoor applications. The sensor is CE certified and designed for global usage. The vision sensor is compact in size and it is portable. It is powered with a 24 Volts DC power supply and it has a current rating of 210 milliamps. It has a power output rating of 5 Watts. The vision sensor needs an additional 1.25 Amps of current if an LED strobe light is used in a specific application. The 8MMIR sensor uses a 15-pin high density D-sub connector that carries the digital I/O and the power lines. 

 

The 8MMIR sensor uses an RJ 45 Ethernet connector for internal network support and communication. It also supports the RK 12 cable for RS 422 communication. The sensor can be mounted by using 4 M4 threaded holes. The sensor weighs 170 grams. The 8MMIR sensor can be connected to a PC for configuration management. It requires a  PC with a basic processing speed requirement of 400 Mhz and the Windows operating system. During installation, the RS 45 digital I/O and power cables are connected to the sensor and the other end of the connector can be connected to the breakout board. The 8MMIR sensor has LED indicators on the side that illuminate when there is power and activity from the sensor.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.