GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1747-KFC15
1747-KFC15
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1747-KFC15 1747-KFC15//A
Common misspellings:
- l747-KFC15
- 17A7-KFC15
- 1747-KFCl5
- 1747KFC15
The 1747-KFC15 by Allen-Bradley is an SLC 500 ControlNet RS-232 Interface Module. It facilitates communication between the SLC 500 modular processor and the ControlNet network using the RS-232 serial port. The module has two ports that allow connection to devices; the RS-232C serial port and the network access port. The RS-232C port allows full or half-duplex communication with a serial port on the connected SLC 500 processor, while the network access port allows a ControlNet programming terminal or device to connect to the module without interfering with the cable wiring. The port numbers range from 1 to 14, however, the 1747-KFC15 uses Port 2 for ControlNet and Port 3 for DF1 communication. It is capable of sending embedded responses, which are DF1 ACK or NAK embedded within another DF1 message. It also has message reply time-out that aids memory buffer management with a default value of 32 seconds.
The 1747-KFC15 module is equipped with status LEDs which show the module’s communication activities as well as the operating conditions. It is configured using the module’s rotary and DIP switches. This configuration should be done when the module is powered off. When users purchase this module, they should ensure that they receive the RS-232 cable as well as the user manual with it. The 1747-KFC15 module is CSA Hazardous Location certified, CE compliant, and UL-listed. It is however, susceptible to damage from electrostatic discharge which can impair the internal semiconductor devices. The 1747-KFC15 weighs 0.4 pounds and can function at a temperature range of 32 to 140 degrees Fahrenheit.
