GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1747-BSN
1747-BSN
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1747-BSN 1747-BSN//A
Common misspellings:
- l747-BSN
- 17A7-BSN
- 1747-8SN
- 1747BSN
The 1747-BSN module by Allen Bradley falls into the SLC 500 Backup scanner module category. It is fitted with redundancy for Remote I/O (RIO). This module has the ability to switch channels in order to simplify communication with devices including operator interfaces. It includes a DH+ link, allowing the first channel on this unit to be configured as either RIO or DH+. The second channel can take over from the RS-232/485 and replace it, to keep a continuous connection to the operator’s electronic interface. These two channels (DH+ or RIO and RS-232/485) may also be used alongside each other.
This module is built as a primary module, stationed in the center of the main system, with a set of complementary units as the secondary system built around it. This unit’s remote I/O operations are all controlled by the center module in this configuration, while the group of secondary modules will instantaneously take control of the operation in case the central module malfunctions.
To write retentive data to the secondary processor from the primary processor, a High-Speed Serial Link (HSSL) is provided. Additionally, this unit contains a Local Serial Link (LSL) to communicate status data to several different 1747-BSN modules that all reside together in the same chassis. This unit’s backup current consumption at 5 Volts is approximately 800 mA.
At approximately 0.9 grams (2 pounds), this module’s size is around 153 x 153 x 76 millimeters (6 x 6 x 3 inches). It should not be placed in an environment lower in temperature than 0 degrees Celsius or higher than 60 (32 to 140 degrees Fahrenheit). Likewise, it is unsafe to store it in a temperature zone that exceeds the minimum of -40 degrees Celsius or the maximum of 85 degrees (-40 to 185 degrees Fahrenheit).
