GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1746-QS
1746-QS
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1746-QS 1746-QS//A
Common misspellings:
- l746-QS
- 17A6-QS
- 1746QS
The Allen-Bradley 1746-QS, a synchronized axis control module, has 4 linear displacement transducer inputs plus 4 analog outputs. It belongs to the SLC 500 series. The inputs are optically-isolated for LDT signals. The outputs have a +-10V optical isolation. The 1746-QS records and updates the drive output on the precise position of the axis every 2ms even at high speeds. The module draws 1000mA and 200mA backplane currents at 5 and 24V, respectively. The 1746-QS has an analog voltage output range of -10-10V DC at 5mA, a 12-bit output resolution, and a 2ms module update time.
The fail-safe timers on the 1746-QS disables the drive output for 15µs. The module weighs 1.1 kg. The 1746-QS provides a way to control the positioning of the servo with 4 axes synchronized in a closed-loop. This control enables the motion parameters to be altered even when the axis is still moving. A hydraulic configurator can be used with the 1746-QS to configure and store the axes’ configuration settings, tune an individual axis with disregard to the ladder program, and cater to repetitive axis motion by storing multiple commands. Additionally, the hydraulic configurator enables help screen access and a way to view the motion commands sent to the module (the last 64 commands.)
The 1746-QS uses 32 words both in the SLC processor and the input image table to initiate communication with the Small Logic Controller processor through the backplane. The SLC processor use the module’s M0 and M1 files to write and read the module’s configuration settings. The 1746-QS has 220 inches of maximum input frequency at a resolution of 0.002-inch.
