GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1746-OBP8
1746-OBP8
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1746-OBP8 1746-OBP8//A1746-OBP8//B
Common misspellings:
- l746-OBP8
- 17A6-OBP8
- 1746-0BP8
- 1746-O8P8
- 1746-OBPb
- 1746OBP8
The Allen-Bradley 1746-OBP8 is a high-current, solid-state output module. This module belongs to the SLC 500 group of programmable controllers. The 1746-OBP8 provides enhanced features for SLC product systems. These features include: increased current rating, fuse protection and diagnostics, high-speed switching, and excellent reliability. High-current, solid-state output modules such as the 1746-OBP8 increase the application radius in packaging, automotive and material handling applications. This extended reach is achieved by allowing the 1746-OBP8 to instantly control solenoids, motors, contractors and motor starter loads.
The 1746-OBP8 has 8 output points with 4 points per common and has an operating voltage of 24V DC. The backplane current for the 1746-OBP8 is 135mA at 5V and 0mA at 24V. In addition, the 1746-OBP8 has 0.300W per point, a minimum of 0.675W and a maximum of 3.08W. The output module has a maximum resistive load signal of 1.0ms when ON and 2.0ms when OFF. The 1746-OBP8 has a maximum off-state leakage of 1mA and a minimum current load of 1mA at 0-60º C (32-140º F). Additionally, the 1746-OBP8 has a continuous current of 1A at 60º C (140º F). The continuous current per module in the same temperature range for the output module is approximately 8.0 A. The maximum voltage drop for the 1746-OBP8 is 1.0V at 2.0A, 4.0A. The surge current per point for the module is 10ms and the surge current per module is 32.0A for 10ms.
The 1746-OBP8 has no electronic protection. The 1746-OBP8 series B can be used as a surge suppressor for inductive loads with a fast off delay.
