GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1746-OB32E
1746-OB32E
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1746-OB32E 1746-OB32E//A
Common misspellings:
- l746-OB32E
- 17A6-OB32E
- 1746-0B32E
- 1746-O832E
- 1746OB32E
The Allen-Bradley 1746-OB32E digital output module has electronic protected outputs. The electronic protection prevents a short circuit in 1 channel from affecting the other output channels. The 1746-OB32E has 32 output points. The module also has a thermal dissipation of 0.078 watts per point, a minimum dissipation of 2.26 watts, and a total dissipation of 4.8 watts. The 1746-OB32E operates at 24V DC and its voltage range is 10-30V DC. It draws a backplane current of 190mA at 5V and one of 0mA at 24V. It features 16 points per common group.
The 1746-OB32E has a minimum load current of 1mA and a maximum leakage current of 1mA in the off-state. The 1746-OB32E has a signal delay of 1 ms and 2 ms in the ON and OFF states, respectively. In addition, the 1746-OB32E has a continuous current of 8A at 32-140 degrees Fahrenheit per module, and it has a continuous current per point of 0.5A at 86 degrees Fahrenheit or of 0.25A at 140 degrees Fahrenheit. For 10ms, the 1746-OB32E has a surge current of 1.0A at 86 degrees Fahrenheit and of 1A at 140 degrees Fahrenheit per point. At 86 degrees Fahrenheit, the 1746-OB32E has a surge current repeatability of 1 ms and of 2 ms at 140 degrees Fahrenheit.
The 1746-OB32E is a sourcing DC module. Its wiring can be done using the 1492 bulletin interface module plus pre-wired cables. The module operates at a temperature of 32-140 degrees Fahrenheit and a storage temperature of -40-185 degrees Fahrenheit. The 1746-OB32E weighs 30g.
