GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1746-IV32
1746-IV32
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1746-IV32 1746-IV32//A1746-IV32//B1746-IV32//C1746-IV32//D
Common misspellings:
- l746-IV32
- 17A6-IV32
- 1746-1V32
- 1746-lV32
- 1746IV32
The Allen Bradley 1746-IV32 is a 24V SLC 500 Current Sourcing Digital DC Input Module. It has high density so it is suited for limited panel space. It operates at a voltage range of 15 to 30V DC at 122 degrees Fahrenheit and 15 to 26V DC at 140 degrees Fahrenheit. Its backplane current 50mA at 5V and backplane current load is 106mA at 5V. Nominal input current is 5.1mA at 24V DC. It has 32 input points and 8 points per common. There are 0.2 watts per point. Thermal dissipation occurs at a minimum of 0.53 watts and a maximum of 6.90 watts. Its signal on and off have a maximum delay of 3 milliseconds respectively.
The 1746-IV32 can be installed into any slot on the chassis. It is compatible with 1492-Cable * G which has a total of 40 conductors. It is also compatible with the 1492-Cable N3 which has 40 #18 AWG individually colored conductors. This compatibility exists because the 32-point modules have a 40-pin male connector rather than screw terminals. The V DC pins are isolated into 4 groups and the 2V DC pins have an internal connection. A 1492 terminal block capable of providing group isolation must be used in order to keep the group isolation feature offered by this input module.
The 1746-IV32 can be used in either fixed or modular type controllers. Its modules are fused to offer protection to external wiring. There is a single fuse for each common. These fuses cannot be replaced and have a 2.5A rating.
