GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-OX8I
1756-OX8I
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-OX8I 1756-OX8I//A
Common misspellings:
- l756-OX8I
- 1756-0X8I
- 1756-OXbI
- 1756-OX81
- 1756-OX8l
- 1756OX8I
The 1756-OX8I is an isolated contact output module of the ControlLogix series manufactured by Allen-Bradley. It has ratings of 10 to 240 Volts AC or 5 to 135 Volts DC operating voltage, 0.5 to 1.5 Amps contact current, 10.57 BTU per hour thermal dissipation, and 2.9 Watts backplane power. This module features 8 individually isolated outputs, each of which can support loads requiring up to 10 milliamps of current.
Rack optimized or direct connection options can be used for installing the 1756-OX8I module and its remote connections to the module can be achieved through Internet Protocol (IP), ControlNet, or EtherNet network options. It is suitable for transmitting operation and configuration data between controllers and other devices within a ControlLogix system and it can also be mounted on a local 1756 chassis while receiving commands for module configuration and operation from a single Logix5000 controller. The safety requirements of the 1756-OX8I ControlLogix isolated contact output module are through its fault-reporting and diagnostic features. It offers flexible installation options by not disrupting the operations when it is detached or installed in the system. To prevent physical damage to the module, it has to be operated within its power rating limit and in an environment devoid of corrosive gases.
