GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-OB16E
1756-OB16E
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-OB16E 1756-OB16E//A
Common misspellings:
- l756-OB16E
- 1756-0B16E
- 1756-O816E
- 1756-OBl6E
- 1756OB16E
The 1756-OB16E is a fused DC output module. It is manufactured and created by Allen-Bradley. It comes from the ControlLogix family of input/output modules. It has 16-point fused o/p with 8 points in each group. It has a maximum operating voltage of 31.2 Volts DC and a minimum operating voltage of 10 Volts DC. It comes with a backplane power rating of 1.32 Watts and it draws 250 mA of current at 5.1 Volts and it draws 2 mA of current at 24 Volts. It has 250 Volts of continuous isolation voltage. The 1756-OB16E has an open-type enclosure. It comes with 2 removable terminal block houses. It comes mounted with a ControlLogix chassis. The module should be properly grounded before installation.
It can program the module from program state to fault state, or output state in the fault mode or program mode. It can handle multiple output densities and it has editable states. It also supports both isolated and non-isolated output modules. It provides on/off detection and it also provides actuation. The 1756-OB16E provides real time channel sampling and it offers electronic module keying which is configured by the users. It can also timestamp various series of events during operation. It offers enhanced input/output diagnostics to determine both system and field failures. It has another security feature which can encrypt important information that is shared between controllers and servers to prevent information tampering. It comes pre-calibrated so it does not require onsite field calibration.
