GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-IV16
1756-IV16
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-IV16 1756-IV16//A
Common misspellings:
- l756-IV16
- 1756-1V16
- 1756-lV16
- 1756-IVl6
- 1756IV16
The Allen-Bradley 1756-IV16 digital sourcing I/O module is manufactured by Allen-Bradley/Rockwell Automation. The 1756-IV16 input module comes with 16 inputs available in 2 groups, and 8 points in a group. It is compatible and it works with the ControlLogix 1756 chassis, it needs a detachable terminal block frame, or RTB, that can be the 1756-TBSH or the 1756-TBNH, before attaching it to the chassis. Only the input data format can be used by this module. The operating voltage for the 1756-IV16 module ranges between 10 and 30 Volts DC. It has a 12 to 24 Volts DC source voltage category, with a nominal input voltage of 24 Volts DC. The total backplane power is 0.61 Watts, with a maximum inrush current of 250 mA.
The 1756-IV16 module has a maximum input impedance of 3.2 kΩ at 30 Volts DC, and a maximum power dissipation of 5.1 Watts at 60 degrees Celsius, with a thermal dissipation of 18.47 BTU/hour. The module structures a continuous isolation voltage of 250 Volts. In an off-state, the 1756-IV16 has a maximum voltage of 5 Volts DC as well as a maximum current of 1.5 mA. When the module is in an on-state, it has a current range of as low as 2 mA at 10 Volts DC and a maximum of 10 mA at 30 Volts DC. The 1756-IV16 module comes equipped with a screw to the backplane input delay time. The variation depends on whether it is going from ‘off' to 'on' or vice versa. When going from 'off' to 'on', the input delay time is the hardware delay with a nominal time of 280 microseconds along with a maximum time of 1 millisecond plus the user-selectable filter time (which is either 0 milliseconds, 1 millisecond, or 2 milliseconds). When going from 'on' to 'off, the input delay time is the hardware delay time has a nominal of 540 microseconds along with a maximum of 2 milliseconds. In addition, there is the user-selectable filter time (1 millisecond, 2 milliseconds, 9 milliseconds, or 18 milliseconds).
